Statement On Marking; Available Models; Communication; Reference Manuals - Omega PLATINUM Series User Manual

1.3 Statement on
OMEGA policy is to comply with all worldwide safety and EMI/EMC regulations that
apply to CE Certification standards, including EMC Directive 2014/30/EU LVD (Safety)
Directive 2014/35/EU, and EEE RoHS II Directive 2011/65/EU. OMEGA is constantly
pursuing certification of its products to the European New Approach Directives. OMEGA
will add the
1.4

Available Models

The Universal Benchtop Meter has two available models with features as listed in Table 2.
Model
MDS8PT-330-C24-EIP
-EIP
-C24
-330
-A
MDS8PT-330
-330
1.5.

Communication

The Platinum Series Benchtop Meter uses a standard USB port compatible with the
Omega Platinum configuration software, available from the Omega
Optional serial and Ethernet connectivity manuals. All communication options support
both the Omega ASCII protocol, Modbus ASCII, Modbus RTU and Modbus TCP/IP.
Refer to Table 3 for supporting manuals.
1.6

Reference Manuals

Refer to these supporting documents for complete information about operation and
configuration of the Benchtop Meter.
Number Title
M5460 Platinum Series Temperature and Process Meters - User's Manual
M5461
Software Configuration - User's Manual
M5451
Platinum Series Temperature and Process Controllers - User's Manual
M5452
Serial Communication Protocol
M5458
Platinum Series User Manual - Modbus Interface
Marking
marking to every applicable device upon verification of compliance.

Table 2. Model Features

Features
Benchtop Meter
Ethernet
Isolated RS232 and RS485
Dual Alarm Relays
Isolated Analog Output
Benchtop Meter
Dual Alarm Relays (ONLY)
Table 3. Supporting Documentation
2
website; as well as