Digital effects can be set with the controls on the body of the camcorder or the
wireless controller.
Operating faders
Sound and image fade together.
When operating faders in TAPE CAMERA mode, make sure the program selector
is set to Q.
,
+
TAPE
CAMERA
Select fader
1. Press the D.EFFECTS SELECT button to open the digital effects
menu.
• D.EFFECT |, FADER, EFFECT and MULTI-S appear.
2. Select FADER.
• The settings appear. Select the setting by turning the selector dial.
3. Select the desired setting.
• You return to the digital effects menu.
4. Press the D.EFFECTS SELECT button to close the menu.
• The name of your selected fader flashes in the display.
Fader on/off
5. Press the D.EFFECTS ON/OFF button.
• The name of your selection stops flashing.
• Each time you press the D.EFFECTS ON/OFF button, the chosen fader is
activated (display lights continuously) or deactivated (display flashes).
6. If you're in TAPE CAMERA mode:
If you're in TAPE PLAY (VCR) mode:
PLAY
+
TAPE
(VCR)
Fade in- Press the start/stop button.
Fade out- Press the start/stop button.
Fade in- Press the
Fade out- Press the
MENU
SET
D.EFFECTS
ON/OFF
e (play)
button.
a
(pause) button.
E
65