Table of Contents
Advertisement
Digital effects can be set with the controls on the body of the camcorder or the
wireless controller. Pressing the ▲/▼ buttons on the wireless controller
correspond to turning the selector dial up and down, and pressing the SET button
corresponds to pressing the selector dial in.
P
Operating faders
Sound and image fade together.
When operating faders in TAPE CAMERA mode, make sure the program selector
is set to Q.
,
+
TAPE
CAMERA
Select fader
1. Press the DIGITAL EFFECTS button to open the digital effects
menu.
• D.EFFECT
2. Select FADER.
• FADE-T, WIPE , WIPE
PLAY (VCR) mode.
3. Select the desired setting.
• You return to the digital effects menu.
4. Press the DIGITAL EFFECTS button to close the menu.
• The name of your selected fader flashes in the display.
Fader on/off
5. Press the ON/OFF button.
• The name of your selection stops flashing.
• Each time you press the ON/OFF button, the chosen fader is activated
(display lights continuously) or deactivated (display flashes).
PLAY
+
TAPE
(VCR)
, FADER and EFFECT appear.
settings appear. M.FADE also appears in TAPE
ON/OFF
DIGITAL
EFFECTS
MENU
SET
D.EFFECTS
ON/OFF
E
61
Hide quick links:
Advertisement
Table of Contents
