Canon Elura40 Instruction Manual page 89

Dubbing
1. Find a point on your recorded tape slightly before the section you
want to copy and set it to playback pause mode.
2. Press the REC PAUSE button on the wireless controller.
• S-video and AV IN/OUT terminals work as input terminals.
• The camcorder enters record pause mode.
3. Start playback on the other device or turn on the TV to see the
desired program while you monitor the picture.
4. Press the pause button.
• Recording starts.
5. When you get to the point where you want to stop recording, press
the stop button or the pause button.
• Recording stops.
6. Stop playback on the other device.
Note:
• You can monitor the picture in the viewfinder or LCD screen.
E
89