Recording Movies Onto A Memory Card - Canon Elura40 Instruction Manual

Recording Movies onto a Memory Card

You can record movies onto a memory card. Transferring the movie to a PC
allows you to view it on the PC or to attach it to your e-mail (please refer to the
CANON DIGITAL VIDEO SOLUTION DISK for detailed instructions).
In addition to the movie you record directly onto the memory card, you can
record movies from a tape or input via the AV terminal (analog line-in) or the DV
terminal onto the memory card.
The sound of the movie recorded to a memory card will be monaural. The
sampling sequence will be 16kHz.
• Make sure a memory card with enough memory available is inserted into the
camcorder.
• When you are using an SD Memory Card, make sure the protect switch is set to
allow recording.
• While the card access indicator flashes, do not disconnect the power source.
Doing so could result in data damage.
+
CARD CAMERA
1. Turn the POWER switch to CAMERA.
2. Move the TAPE/CARD switch to CARD.
3. Press the START/STOP button.
• You can record up to 10 seconds in 320 × 240 and 30 seconds in 160 × 120.
• Press the START/STOP to end recording.
• The camcorder starts to write the movie to the memory card when recording
is finished.
Notes:
• For using the self-timer (
the START/STOP button.
• Do not load/unload a tape during recording. Sound will not be recording during
this operation.
71), set the self-timer before step 3, and then press
E
111