Canon Elura40 Instruction Manual page 165

Appears immediately
after you start
recording, and the
video heads are badly
contaminated. Make
sure to clean the video
heads when this
caution appears.
( 149)
Memory card caution phrases
An error has occurred
with the memory card.
The camcorder cannot
record or play back. A
temporary card error
is also possible. If
CARD ERROR disappears after 4 seconds
and flashes red, turn the camcorder's
power off and back on again, and remove
and reinsert the card. If
recording or playing back is possible.
There is no more
remaining memory
on the memory card.
Change the card or
erase images.
You have reached the
maximum file or
folder number.
( 104)
The image has been
recorded in an
incompatible JPEG
format or other
format that the
camcorder cannot
play back, or the
image data has been
damaged.
Appears if you have
tried to mark 100 or
HEADS DIRTY,
more images for
USE CLEANING CASSETTE
printing, or if a mark
file cannot be edited.
(
No memory card is
inserted in the
camcorder.
(
There are no images
CARD ERROR recorded on the
memory card.
You are using an SD
Memory Card and it
flashes green,
is set for erasure pre-
vention. Change the
position of the protect
switch.
CARD FULL
Depending on the
signal, some analog
images cannot be
recorded on the
memory card as still
image.
NAMING ERROR
UNIDENTIFIABLE
IMAGE
119)
102)
THE CARD IS SET FOR
ERASURE PREVENTION
THIS IMAGE CANNOT
BE RECORDED
E
PRINT MARK ERROR
NO CARD
NO IMAGES
165