Operating Faders - Canon MV500 Instruction Manual

Digital effects can be set with the controls on the body of the camcorder or the
wireless controller. Pressing the L/M buttons on the wireless controller
correspond to turning the selector dial up and down, and pressing the SET button
corresponds to pressing the selector dial in.
DIGITAL DIGITAL ON/OFF ON/OFF
EFFECTS EFFECTS

Operating faders

Sound and image fade together.
When operating faders in CAMERA mode, make sure the program selector is set
to Q.
PLAY
,
CAMERA
(VCR)
Select fader
1. Press the DIGITAL EFFECTS button to open the digital effects
menu.
• D.EFFECT |, FADER and EFFECT appear.
2. Select FADER.
• FADE-T, WIPE
PLAY (VCR) mode.
3. Select the desired setting.
• You return to the digital effects menu.
4. Press the DIGITAL EFFECTS button to close the menu.
• The name of your selected fader flashes in the display.
Fader on/off
5. Press the ON/OFF button.
• The name of your selection stops flashing.
• Each time you press the ON/OFF button, the chosen fader is activated
(display lights continuously) or deactivated (display flashes).
, WIPE settings appear. M.FADE also appears in
MENU
P P
D.EFFECTS
E
SET
ON/OFF
59