Table of Contents
Advertisement
I
1-6
nstallatIon
NOTE: Merchandisers must be leveled before
joining. Verify all top rails, panels and
bumper retainers of each merchandiser to be
joined align vertically before joining.
BEXDW8G
NOTE:
Do not place levels on Display Pans
or on Racks.
To correct vertical alignment of top rails and
upper front panel, adjust shims as necessary.
Verify alignment of panels, bumper retainer and
top rail.
Shim cases to ensure vertical alignment of panels
and top rails.
P/N 3093114_A
Shim
Insert Shim
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
4. Align frame fasteners. Fastener size and
location are detailed on Pages 1-8 and
1-9. Loosely assemble bolt, washers, lock-
washer and nut as shown here.
For glass cases, remove nut retainer clips in
one of the case's end frame for each pair of
cases joined in the lineup.
N
ote that aligNmeNt order is differeNt from
!
tighteNiNg order
Do not attempt to draw merchandisers together
using nut and bolt.
NOTE: Joining hardware is shown enlarged for clarity.
Shims
Advertisement
Table of Contents
