Table of Contents
Advertisement
D
P
s
3-6
RIP
IPIng anD
PlashguaRDs
Installing Splashguard on End and End Case
An end splashguard ships with each end
assembly. End case splashguards ship with
the case. Install end splashguards after main
splashguards.
1. Check to be sure that all splashguard
brackets are level with the floor.
2. Position top of splashguard with the top
angled in, behind the lower panel bracket.
3. Raise the splashguard enough to align the
tabs on the splashguard brackets with the slots
in the bottom edge of the splashguard. Engage
the tabs in the slots and drop the splashguard
into place.
Cove trim may be added in the same way as
End Splashguard Installed
for the main splashguards.
P/N 3093114_A
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM
Advertisement
Table of Contents
