Dubbing To/From A Cassette With Digital Video Equipment - Canon XL1SA Instruction Manual

Dubbing to/from a Cassette with Digital Video Equipment

Digital video equipment fitted with the DV terminal lets you edit, copy and transfer data digitally, with
E
virtually no generation loss in image and sound quality. The DV terminal is for both line-in and line-out,
since a single DV cable can handle data in both directions.
• If a digital VCR is connected and an anomalous signal is sent from the VCR, the images recorded on the
tape may also be anomalous (although it may not appear so on the TV image), or not recorded at all.
• You are unable to dub tapes recorded with the copyright protective signal.
• You cannot dub a tape recorded in ´SP or ´LP modes.
Preparations
Example dubbing to the camera
1. Connect the camera and the other digital device.
• Connect the Canon CV-150F DV cable (optional) with the sides of the plugs marked with the arrows
facing as shown above.
2. Prepare the other device.
• Turn on the power and load a recorded cassette.
3. Turn the camera's POWER dial to VCR.
• DV IN appears in the viewfinder.
4. Load a blank cassette.
86
Signal flow
AUDIO
MONITER
SEARCH SELECT
REW
REC
AUDIO DUB.
AV INSERT
PAUSE
AUDIO
DUB.
ST-1 ST-2
MIX
BALANCE
PLAY FF
STOP
PAUSE SLOW 2
REC