Table of Contents
Advertisement
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1
M
N#268
2
MbN: "On" a MOKN
3
MbN: Select "External" to monitor
from an outside line. a M
4
MbN: "Manual" a MOKN
5
Enter the desired name. a MOKN
6
Enter the desired number. a MOKN 2
times
R "Baby Monitor" will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to "On".
1
Press M
N on the handset being
monitored.
2
MbN: "On/Off" a MOKN
3
MbN: "Off" a MOKN a M
Editing an outside monitoring number
1
Press M
N on the handset being
monitored.
2
MbN: "On/Off" a MOKN
3
MbN: "On" a MOKN
4
MbN: Select the outside line.
5
M
N a MbN: "Edit" a MOKN
6
Edit the name if necessary. a MOKN
7
Edit the phone number if necessary. a
MOKN 2 times
Erasing an outside monitoring
number
1
Press M
N on the handset being
monitored.
2
MbN: "On/Off" a MOKN
TGE610HK(en_en)_0817_ver022.pdf 29
3
MbN: "On" a MOKN
4
MbN: Select the outside line.
5
M
N a MbN: "Erase" a MOKN
6
MbN: "Yes" a MOKN a M
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
N
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
monitoring call.
1
Press M
monitored.
2
MbN: "Sensitivity Level" a MOKN
3
MbN: Select the desired setting. a MOKN
a M
Answering the baby monitor
Answer the call.
If you want to respond from your monitoring
phone, press #1 using tone dialling.
You can turn off the baby monitor feature by
pressing #0.
N
Note:
R The unit disconnects the call automatically
after 2 minutes.
Other programming
Changing the handset name
The default handset name is "Handset 1".
You can customise the name of the handset
("Bob", "Kitchen", etc.). To display the handset
name in standby mode, turn on the handset
name display feature (page 30).
1
M
N#104
2
Enter the desired name (10 characters
max.). a MOKN a M
Programming
N
N on the handset being
N
N
2018/08/23 12:37:46
29
Advertisement
Table of Contents
