Table of Contents
Advertisement
Programming
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is "Off".
1
M
N#105
2
MbN: Select the desired setting. a MOKN
a M
N
Call restriction
You can restrict the handset from dialling
certain numbers. You can assign up to 6
phone numbers to be restricted. Storing area
codes here prevents the handset from dialling
any phone number in that area code.
1
M
N#256
2
Enter the base unit PIN (default: "0000").
R If you forget your PIN, contact an
authorised service centre.
3
M N
R " " is displayed next to the handset
number.
R To cancel the handset, press M N
again. " " disappears.
4
MOKN
5
MbN: Select a memory location. a MOKN
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
M
N
Enhancing security for phone
calls
You can increase the security of phone
conversations by setting this feature to
"Enhanced". When "Enhanced" is selected,
is displayed. The default setting is
"Normal".
1
M
N#729
2
MbN: Selected the desired setting. a MOKN
3
M
N
Note:
R If you set repeater mode to "On"
(page 31):
30
TGE610HK(en_en)_0817_ver022.pdf 30
– Security is set to "Normal" and
displayed.
– "Security" is not displayed in the
display menu (page 24).
R When enhanced security is enabled, sound
may cut in and out during conversations.
Changing the base unit PIN
Important:
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
M
N#132
2
Enter the current 4-digit base unit PIN
(default: "0000").
3
Enter the new 4-digit base unit PIN. a
MOKN
4
MbN: "Yes" a MOKN a M
Registering a unit
Operating additional units
Additional base units
Handset can be registered to up to 4 base
units, allowing you to add additional base units
and extend the area in which your handset
can be used. If the handset moves out of
range of its base unit when "Auto" is selected
on base unit (page 31), it looks for another
base unit to make or receive calls. A base unit
and the handset it communicates with is called
a "radio cell".
Note:
R Calls are disconnected when the handset
moves from one radio cell to another.
Registering a handset to a base unit
1
Handset:
M
N#130
is
N
2018/08/23 12:37:46
Advertisement
Table of Contents
