4.2 Ignition Power Management Quick Guide
Startup conditions from the IGNITION signal:
IGNITION startup signal must be valid during 3 sec. (anti noise protection).
Typically the system can start only from IGNITION signal, because startup PIC controller
is disconnected from the power source.
Startup Procedure by Ignition
9VDC~48VDC
Power Input
Startup Procedure by Power Button
9VDC~48VDC
Power Input
Technical Support
Please do not hesitate contact with CARTFT.COM E.K. for API and utility when you still
cannot fix the problems.
Tel : +49 7121 3878264
Fax : +49 7121 3878265
E‐mail : sales@cartft.com
Website : www.CarTFT.com
User's Manual
Check IGN
Status
Push Power
Button
IGN on (High)
more than
3sec
System Turn
on
4.0 System Resource
System Turn
on
Page 4-2