Panasonic LUMIX DC-GH5M2 Operating Instructions Manual page 353

10. Recording Videos – Time Code
[Time Code Mode]
[DF]: Drop Frame. The camera modifies the difference between recorded time
and time code.
•
Seconds and frames are separated by ".". (Example: 00:00:00.00)
[NDF]: Non-Drop Frame. Records the time code without drop frame.
•
Seconds and frames are separated by ":". (Example: 00:00:00:00)
•
When the following functions are being used, [Time Code Mode] is fixed to
[NDF]:
– [50.00Hz (PAL)]/[24.00Hz (CINEMA)] ([System Frequency])
– 23.98p [Rec Quality]
[HDMI Time Code Output]
Time code information is added to images output via HDMI when recording with
the [
•
The time code can also be output via HDMI by setting the mode dial to [
during playback.
In the [Setup] ([IN/OUT]) menu, set [Output Resolution(Playback)] in [HDMI
Connection] to [AUTO].
•
The device screen may go dark depending on the connected device.
] mode.
([HDMI Connection]: 591)
353
]