Selecting Images - Panasonic LUMIX DC-GH5M2 Operating Instructions Manual

15. Wi-Fi/Bluetooth – Send Settings and Selecting Images

Selecting Images

When sending by [Send Images Stored in the Camera], select the images
using the following procedure.
1
Select [Single Select] or [Multi Select].
2
Select the image.
[Single Select] setting
1 Press 21 to select an image.
2 Press
[Multi Select] setting
1 Press 3421 to select an image and then press
•
To cancel the setting, press
•
Images are displayed separately by card slot.
To switch the card to display, press [
•
Selecting images at once is possible only for the images in a single card.
2 Press [DISP.] to execute.
or .
1 2 3
4 5 6
or again.
].
674
or . (Repeat this)