Panasonic LUMIX DC-GH5M2 Operating Instructions Manual page 681

16. Streaming Function – Stream by Operating the Camera
3 Input the streaming destination (URL, stream key) to "LUMIX Network
Setting Software" and select [Next].
4 Set the output destination (card) and file name, and select [Save].
•
Characters that can be set in [File Name]: Alphabet (uppercase),
numbers, up to 8 characters.
•
To prevent usage from a third party, you can secure the streaming
destination with a password.
– Put a check mark in [Password].
– When you set a password, password input will be required when
loading the streaming destination.
– You can enter any 4-digit numbers as the password.
•
The settings set at step 3 is saved in the card.
(Camera operation)
2
Insert a card to the camera.
3
Set up streaming settings on the camera.
1 Set the mode dial to [
2 Load the streaming destination to the camera.
•
Streaming Address]
•
If a password is set at step 1, input the password.
3 Set the streaming quality and wireless access point to connect to.
•
Quality]/[Wi-Fi Connection Setting]
4 Set [Streaming Function] to [ON].
•
Function]
•
If the message [Unable to confirm security of the streaming address.
Continue?] is displayed, check that the URL of the streaming destination
is correct before continuing the connecting operation.
•
The camera connects to the access point via Wi-Fi.
•
[
 
[ ] [
 [ ]  [
 
[ ] [

[ON]
] is displayed on the recording screen.
].
 
] [Wi-Fi] [Streaming Setup]
 [Load]
]  [Wi-Fi]  [Streaming Setup]
(Streaming Settings:
 
] [Wi-Fi] [Streaming Setup]
681

[Save/Load
 [Streaming
683)

[Streaming