Charging The Addvolt System Connected To The Power Grid - Carrier AddVolt User Manual

Table of Contents

Advertisement

4.4

Charging the AddVolt system connected to the power grid

During daily operation, whenever the user has the opportunity to charge
the system from the power grid, please proceed as described below:
1.
Press the green button (OFF light in white);
2.
Connect the vehicle to the power grid;
3.
Check that
4.
Wait 30 seconds, the system will start charging automatically
and the ON light will be either blinking or lit in white;
5.
The autonomy indicators will blink during charge representing
the battery level.
Notes:
(1) When the vehicle is parked
It is not necessary to disconnect the power grid cable whenever the charge is complete. It is
advised to leave at least 2-4 times a month the system connected to the power grid for more
than 5 hours.
(2) Before disconnecting the power grid cable, do the following:
1.
Stop the Refrigeration unit;
2.
Press the green button until OFF is lit;
3.
Disconnect the power grid cable.
is lit in white;
10
62-61974-01

Advertisement

Table of Contents
loading

Table of Contents