Power Connection - GB GAME RIDER BGB7200 Manual

B-1. Connect to LCD TV included with the Game Bike (or to any home TV set):
i. This connection enables user to play the games that are preloaded with the Bike Monitor, and, display the
games on the LCD-TV (#60) that is included with the Game Bike, or, on user's home TV set (if preferred).
ii. First, connect the single-headed end of the AV Out Cable (#52a) to the AV-OUT port on the Bike Monitor
(#43). Connect the other double-headed end of the Audio/Video Cable (#52b/c) to the corresponding
colors (i.e. yellow to yellow; white to white) while plugging the cables to the ports on the TV.
iii. To prevent bad connection between the Bike Monitor (#43) and LCD-TV (#60) when playing, please
secure the AV cable using the pre-assembled plastic buckle on the back of the Bike Monitor (#43).
To secure the cable, refer to the illustration below and:
1. LIFT the strap so it is free to move from the buckle stopper.
2. SLIDE & PULL the strap fully out of the buckle.
3. PLACE the AV cable within the track of the buckle.
4. TUCK, SLIDE, & PULL the strap back through the buckle.
5. SECURE the AV cable in place and ensure one of the strap notches is secured by the buckle stopper.
iv. POWER CONNECTION:
If you are using the LCD-TV (#60) that is included with the Game Bike, please connect the female head
of the Power Wire for LCD Screen (#51c) to the rectangular box of the AC Adapter for LCD Screen
(#51b). Next, connect the other end of the AC Adapter for LCD Screen (#51b) to the corresponding head of
the AC Adapter Extension Wire (#51a). Continue by plugging in the free end of the AC Adapter Extension
Wire (#51a) into the port on the LCD-TV (#60). Lastly, plug in the free end of the Power Wire for LCD
Screen (#51) into a power source.
BGB 7200
[GAME] Mode Operation
Page 16