Table of Contents

Advertisement

I.
II. Playing Games PRELOADED in the Bike Monitor:
A. Start-Up Procedure:
A-1. Connect the Bike Monitor (#43) to the TV set: please follow the instructions described in the
"Connect to TV Set " section above.
A-2. Power ON the TV set, and, use the TV remote controller to select INPUT (usually an "Input" or "AV"
button) to the corresponding AV Input ports
If you are using the LCD-TV included with the Game Rider, please refer to the LCD-TV Operations guide
on pg. for this step.
A-3. At this point, you should see the Game Menu display on your TV set.
A-4. Plug in the proper end of the AC Adapter for Bike (DC 8V, 1000mA) (#50) into the socket located at
the rear end of the bike. Plug in the other end of the AC Adapter to a power source.
A-5. Press the "GAME/FIT " button on the bike monitor to activate the "GAME " mode.
a. If you see the below display on monitor (with only the MANUAL option on the top line) after pressing
the "GAME/FIT " button, then, you are in "GAME " mode.
b. However, if you see the below display on monitor after pressing the "GAME/FIT " button, then, you are
in "FITness" mode. Press the "GAME/FIT " button again to switch to the "GAME/FIT " mode.
You are now ready to play the games while exercising on the bike. The gaming visual will be displayed
on your TV screen. Please follow the instructions in the next section to control or manipulate the games.
B. Game Control & Manipulation:
B-1. Buttons on Monitor:
a.There are four buttons (with red icons) on the Monitor in the zone marked " GAME SELECT ". These
four buttons are used in selecting different games or options in games.
b. NOTE : these four buttons will function ONLY in "GAME" mode. If you find that these four
buttons do not respond when pressed, please press the "GAME/FIT " button to switch to the "GAME
mode.
c.Button Functions:
:UP
:LEFT
:RIGHT
:EXIT
DOWN
:DOWN
-
:UP
UP
BGB 7200
[GAME] Mode Operation
Playing Games PRELOADED inside the Wireless Receiver Box:
M
M
UP key in menu selection.
LEFT key in menu selection.
RIGHT key in menu selection.
EXIT current selection menu and go to the top menu. Pressing this button in the
middle of playing will EXIT the current game and go to the top menu for
other game selection.
DECREASE the resistance level of the bike during game playing
INCREASE the resistance level of the bike during game playing
(i.e. AV1, AV2, etc.) which you connected the AV Cable.

GAME MODE

FIT(ness) MODE
"
Page 1 8

Advertisement

Table of Contents
loading

Related Products for GB GAME RIDER BGB7200

Table of Contents