GB GAME RIDER BGB7200 Manual page 26

B-1 You may press ST/STOP button to start training directly (b2), or you may press UP/DOWN buttons to adjust
resistance level (b3). During adjustment, you will see the display changes when you press UP or DOWN
buttons twice. You may also adjust training resistance during training.
B-2 After adjustment of the training resistance, you may press ST/STOP to start training or, optionally, set each
function data target by pressing MODE button to select the desired function you want to set target data for.
Then, use the UP/DOWN buttons to set the value. Press MODE button to advanced to the next desired function
area. The functions available for preset are: Time, Distance, Calories, and Pulse in MANUAL mode.(b4)
B-3 After all settings are made, press ST/STOP button to start training. You will see each preset function data counts
down from target as soon as training starts. (b5)
B-4 Once each function target data is achieved (counts down to zero), the monitor will stop all functions (P appears
on the left-upper corner) and beep for 8 times to remind you. (b6)
B-5 You may press ST/STOP button to start training again. The function which has achieved to zero will start from
the previously set data and count down again, and all other set function data will continue counting up or down
from previous records.
B-6 During any training period, you may press ST/STOP to stop monitor counting at anytime.
C. Training in PROGRAM mode - press UP button until PROGRAM shows up on the upper line, press MODE to confirm.
M
(c1)
C-1 The initial set program profile is P1 (c1 & c2). There are 12 training program profiles (P1-P12) available. You
may press UP/DOWN button to select the desired training profile. Press MODE button to confirm.
C-2 You may press ST/STOP button to start training directly (c3), or you may press UP, DOWN buttons to adjust
resistance level (c4). During adjustment, you will see the display changes when you press UP or DOWN
button twice.
C-3 After adjustment of the training resistance, you may press ST/STOP to start training or, Optionally, set each
function data target by following the same procedure as stated in B-2 above. The functions available for
preset are: Time, Distance, Calories, and Pulse in PROGRAM mode.(c5)
M
(c5)
C-4 After all settings are made, press ST/STOP button to start training. You will see each preset function data counts
down from target as soon as training starts.(c6)
C-5 Once each function target data is achieved (counts down to zero), the monitor will stop all functions (P appears
on the left-upper corner) and beep for 8 times to remind you. (c7)
C-6 You may press ST/STOP button to start training again. The function which has achieved to zero will start from
previous set data counting down, and other set function data will keep counting up or down from previous
records.
C-7 During any training period, you may press ST/STOP to stop monitor counting at anytime.
D. Training in USER mode - press UP button until USER shows up on the upper line, press MODE to confirm(d1).
In USER mode, you can set your own desired training program.
BGB 7200
FIT(ness) Mode-Computer Operation
M
(c2)
M
(c6)
M
(c3)
M
(c7)
M
(c4)
Page 24