Advertisement
Quick Links
Advertisement
Related Manuals for Little Folks Furniture BBD005
Summary of Contents for Little Folks Furniture BBD005
- Page 1 Classic Bunk Bed Code: BBD005 PLEASE READ CAREFULLY & KEEP FOR FUTURE REFERENCE...
-
Page 2: Product Safety
Thank you for buying a piece of furniture Treated properly it should be a faithful servant for years - and we hope you get the same amount of pleasure from it. Before you do please take a few minutes to read these instructions we suggest you carefully unpack everything, lay it out on a clean, flat floor and identify everything on the parts list in these instructions. - Page 3 Parts 1 x upper front mattress rail 1 x upper front mattress rail 3 x mattress rails 3 x mattress rails 2 x lower ends 2 x long safety rails 2 x long safety rails 2 x front safety rails 2 x ladder strings 2 x upper ends 3 x ladder treads...
- Page 4 Fitting the rails 32 x small wooden dowels Insert 2 wooden dowels into each end of each rail 1 x upper front mattress rail 3 x mattress rails 2 x long safety rails 2 x front safety rails Building the UPPER bed frame (Two people) 8 x 9cm bolts and 8 x barrel nuts Build the bed with the parts positioned as shown, Locating the wooden dowels into the holes on the two upper bed ends.
- Page 5 Building the LOWER bed frame (Two people) 4 x 9cm bolts and 4 x barrel nuts Build the bed with the parts positioned as shown, Locating the wooden dowels into the holes on the two upper bed ends. Insert a barrel nut into the hole at each end of the rails, allowing it to connect to a long bolt fitted from the outside, rotate to tighten the bed frame Align...
- Page 6 Make the bunk (two people) 4 x large wooden dowels and 8 x wood screws Fit 4 x large wooden dowels into the top of the lower bed (holes in the capping rail of the lower bed). Lift the upper bed onto the lower bed aligning the upper bed onto the dowels.
- Page 7 Fit the ladder Ladder on left illustrated first followed by ladder on right. (in two pages) Fix 4 x wooden dowels into the left-hand ladder string as shown. Rotate the ladder Gently engage the ladder notches over the lower mattress rail and then push the left-hand ladder string up against the bed legs, aligning and engaging the wooden dowels Connect the ladder string...
- Page 8 Secure the ladder Secure the ladder Connect the right-hand ladder string to the mattress rail using a 5cm screw bolt Connect the right-hand ladder string to the mattress rail using a 5cm screw bolt from the inside. Move the mattress slats to allow access to bolt. Now fix the four from the inside.
- Page 9 Fit the ladder Ladder right illustrations. Fix 4 x wooden dowels into the right-hand ladder string as shown. Rotate the ladder Gently engage the ladder notches over the lower mattress rail and then push the right- hand ladder string up against the bed legs, aligning and engaging the wooden dowels Connect the ladder string Connect the ladder string...
- Page 10 Secure the ladder Connect the left-hand ladder string to the mattress rail using a 5cm screw bolt from the inside. Move the mattress slats to allow access to bolt. Now fix the four slats in place. Position the bunk Carefully lift the bunk bed into place using the lower bed ends (Two people) Lift the mattresses upon the sleeping surfaces Note than the upper mattress MAXIMUM thickness at 20cm Please take a few minutes to look over the bunk bed to ensure that...
- Page 11 Make two single beds (Convert the bunk) Conversion Two people required. Carefully remove the ladder and front safety rails. Now remove the wood screws that hold the two bunks together and gently lift the upper bunk off the lower bunk, placing on the floor.