Table of Contents
Advertisement
CAUTION
Updating Software Components
Contacting Keysight Service and Support
Keysight M8100A Series Arbitrary Waveform Generators Getting Started Guide
The enclosure surface of the module may become hot during use. If you
need to remove the module, first power down the AXIe chassis, allow the
module to cool, and then pull the module out of the chassis.
For preventing damage, for usage tips, and for ESD information, read
NOTE
and follow the instructions in the "M8100A Tips for Preventing Damage
Guide" (Document Part No. #M8000-91B30).
Updated versions of the M8070B and module specific software
components are available on the Keysight website.
These software components are available as .EXE files. To download a
software upgrade:
1
Go to
2
Click the Technical Support tab.
3
Click Drivers and Software.
4
Type the model number of the instrument module for which software
update is needed and click Find. Model number is located on the front
panel of the module.
5
Click the Driver and Software link on the module page.
6
Download the required software update from the list of available
updates.
To locate a sales or a service office near you, go to
www.keysight.com/find/contactus
http://www.keysight.com/find/M8070B
Maintenance
3
49
Advertisement
Table of Contents
