Software; Removing The Software; Moving The Software; Updating The Software - Keysight Technologies N8241A User Manual

Software

Removing the Software

Moving the Software

Updating the Software

Troubleshooting
Software
If it is necessary to remove the N8241A software, go to:
Start > Settings > Control Panel > Add/Remove Programs
1. Select Agilent N8241A AWG (Version), then select Remove.
2.
You may need to restart the PC, but this will completely remove all of the files.
If it becomes necessary to move the N8241A software, complete the instructions
Removing the Software
documented in
software where it is needed.
To resolve an error message you get while attempting to upgrade the N8241A
software, take the following steps in the listed order:
1. Go to: Start > Settings > Control Panel > Add/Remove Programs
2. Select Agilent N8241A AWG (Version), then select Remove.
3. You may need to restart the PC, but this will completely remove all of the files.
4.
Reinstall the N8241A software.
112
. Then, using the N8241A CD, reinstall the
Chapter 6