Save And Exit Setup Option; Exit Without Saving Option - ECS P5SD-B Plus Manual

using a very old drive that can't be detected, you can install it manually using the
Standard CMOS Setup option.
Setup will check for two devices on the primary IDE channel and then two devices on
the secondary IDE channel. At each device, the system will flash an N in the dialog
box. Press Enter to skip the device and proceed to the next device. Press Y, then
Enter to tell the system to auto-detect the device.

Save And Exit Setup Option

Highlight this item and press Enter to save the changes that you have made in the
setup utility and exit the setup program. When the Save and Exit dialog box appears,
press Y to save and exit, or press N to return to the setup main menu.

Exit Without Saving Option

Highlight this item and press Enter to discard any changes that you have made in the
setup utility and exit the setup program. When the Exit Without Saving dialog box
appears, press Y to discard changes and exit, or press N to return to the setup main
menu.
26