ECS P5SD-B Plus Manual page 31

Installing the VxD Driver
The VxD driver provides support for an AGP graphics adapter. You only need to
install this driver if you are running Windows 95, and you have installed the
mainboard with an AGP graphics adapter.
The VIA VxD driver is for use in Windows 95 version OSR 2.1 (4.00.950 B) or later.
Windows 95 Installation
You need the following files installed on your system before beginning the installation:
1. Get the file "USBSUPP.EXE" from Microsoft, which includes the USB
supplement and a new memory manager (VMM32.VxD) needed for the AGP
DIME (Direct Memory Execute) feature.
2. Get DirectX 5.0 from Microsoft. DirectX 5.0 is the first DirectX version that
supports AGP's DIME.
3. Get AGP Master (i.e., AGP VGA) Driver from the vendor of your AGP graphics
adapter.
4. Get "VIAGART.VXD", a virtual device manager which usually will be installed
in the following installation procedure of the Windows 95 card driver.
Installation Instructions
1. Click the Windows Start button, and then click on Run.
2. Browse to the correct folder and select the program called SETUP.EXE.
3. Follow the instructions on the screen to complete the installation.
Installing the Power Management Patch
This patch allows Win 95/98 to recognize the VIA chipset in the system device
manager.
Windows 95/98 Installation
1. Click the Windows Start button, and then click on Run.
2. Browse to the correct folder and select the program called SETUP.EXE.
3. Follow the instructions on the screen to complete the installation.
Installing the IRQ Routing Driver
This driver is for Windows 95/98. This driver solves some issues regarding the IRQ
assignment of PCI devices.
Windows 95/98 Installation
1. Click the Windows Start button, and then click on Run.
2. Browse to the correct folder and select the program called SETUP.EXE.
3. Follow the instructions on the screen to complete the installation.
Award Flash Memory Utility
28