ECS P5SD-B Plus Manual page 14

Note: If you install and use both serial ports, you cannot use the infrared
connector JIR1 to install an optional infrared port.
4. Connect the parallel port connector to the parallel port. The parallel port may be
fixed on your system case, or it may be provided on a bracket like the serial port
bracket shown above. Connect the cable to the connector on the motherboard
LPT1.
5. Connect the USB port connectors to the USB ports. The USB ports may be fixed
on your system case, or they may be provided on a bracket like the serial port
bracket shown above. Connect the cable to the connector on the motherboard
JUSB1.
6. Connect the PS/2 mouse connectors to the PS/2 mouse port. The PS/2 mouse port
may be fixed on your system case, or it may be provided on a bracket like the
serial port bracket shown above. Connect the cable to the connector on the
motherboard JP5.
7. Locate the bank of switch and indicator Panel connectors F_PNL1. These
connectors provide control functions to your system case. Use the illustration
below to make the connections. The SMI connector functions as a suspend switch
on systems with an AT power supply and ATX power supply, besides it must be
delayed up to 4 sec., then SMI will function. When the system is on, push the
power button rapidly to switch the system to suspend mode. When the system is
in suspend mode, push the power button rapidly to turn the system on.
8. Locate the power connectors CN6 and CN5. If you are using an AT power unit,
connect the power cable harness to CN6. If you are using an ATX power unit,
connect the power cable harness to CN5.
9. Locate the expansion slots SL1, SL2, (for 8/16-bit ISA cards) and PCI 1,2,3,4 (for
32-bit PCI cards). Install any expansion cards you want to add to your system into
the appropriate slot and secure the card bracket to the system case.
10. Locate the AGP slot. If you are adding an AGP display adapter to your system,
insert the card into the AGP slot.
11. If you have installed an internal modem card, connect the modem to the Wake On
Modem connector JP100.
11
Power K/B
LED Lock
Speaker
HDD SMI Reset
LED SW
Connect to
COM1/2
Power
SW