Save & Exit Setup Option; Exit Without Saving - ECS P4IBAS2 Manual

4. Press <Enter> after you have typed in the password. If
you are deleting a password that is already installed,
press <Enter> when the password dialog box appears.
You see a message that indicates that the password
has been disabled.
PASSWORD DISABLED !!!
Press any key to continue . . .
5. Press any key. You are prompted to confirm the pass-
word:
Confirm Password:
6. Type the password again and press <Enter>, or press
<Enter> if you are deleting a password that is already
installed.
7. If you typed the password correctly, the password will
be installed.
Save & Exit Setup Option
Highlight this item and press <Enter> to save the changes that
you have made in the Setup Utility and exit the Setup Utility.
When the Save and Exit dialog box appears, press <Y> to
save and exit, or press <N> to return to the main menu:

Exit Without Saving

Highlight this item and press <Enter> to discard any changes
that you have made in the Setup Utility and exit the Setup Util-
ity. When the Exit Without Saving dialog box appears, press
<Y> to discard changes and exit, or press <N> to return to the
main menu.
Note: If you have made settings that you do not want to
save, use the "Exit Without Saving" item and press
<Y> to discard any changes you have made.
This concludes Chapter 3. Refer to the next chapter for infor-
mation on the software supplied with the mainboard.
65