ECS P5SD-B Plus Manual page 15

12. If you have installed a network adapter card, connect the adapter to the Wake On
LAN connector JP101.
13. If you have installed an infrared port, connect the port to the Standard Infrared
connector JIR1.
Note: if you install and use an infrared port, you cannot use both of the serial
ports COM1 and COM2
14. If your system case is installed with a separate cooling fan, you can connect the
fan to the cooling fan power connector, FAN2.
15. Finally, complete the installation by connecting a keyboard to the AT-enhanced
keyboard connector.
12