8.6
Maintenance Work
8.6.1 Filter Mats
Figure 8-3 Filter mats
1. Motor Cooling Air Inlet
2. Oil Cooler and Aftercooler Cooling Air Inlet
3. Suction Air Compressor Inlet
4. Control System Inlet Filter
Replacement times for the filter pad
The operating modes and the quality of the suction air (e.g. dust content) have a significant impact on the
service life of the filter pad.
The filter pad should be inspected for dust accumulation at least weekly; daily if possible.
In these usage scenarios, shorter replacement intervals are possible.
As soon as one of the filter pads shows a defect, it must be replaced.
13-25-640 v00
Page 52