Property damage
Do not lift up or lash the compressor system by its enclosure.
Note fork length of forklift.
Transporting the compressor
Figure 4-1 Lifting points
Figure 4-2
1. Wire pin
2. Hinge pin
Before Transporting, the "R" Clips and doors must be removed as follows:
A.
Remove bolts from the transport pallet.
B.
Pull wire pin
C.
Remove doors
D.
Lift the compressor off of the transport pallet.
E.
Transport the compressor to the destination area.
F.
Align the compressor and place it down.
NOTICE
13-25-640 v00
Page 27