Switch Cabinet Inlet Filter - Gardner Denver L Series Original User And Service Manual

8.6.2 Switch Cabinet Inlet Filter

Figure 8-4 Louvered Grille
Figure 8-5 Filter Element Replacement
Change inlet filter
1. Open the mesh cover on the intake filter.
2. Remove dirty filter.
3. Insert new filter.
4. Close louvered grille.
Replacement times for the inlet filter elements
The operating modes and the quality of the suction air (e.g. dust content) have a significant impact
on the service life of the filter elements.
The filter elements should be inspected for dust accumulation at least weekly; daily if possible.
If usage scenarios transpire with, for example, a high rate of dust accumulation, the replacement
intervals must be shortened in relation to the maintenance plan.
13-25-640 v00 Page 53