Disassembly - Gardner Denver L Series Original User And Service Manual

9.3

Disassembly

Damage to health
Risk of damage to health from consumables and auxiliary materials
Consumables and auxiliary materials can cause irreparable damage to health, induce allergies,
or irritate mucous membranes.
 Follow the locally applicable operating instructions and hazardous material safety data
sheets when handling consumables and auxiliary materials.
 Avoid direct contact with consumables and auxiliary materials. Wear personal protective
equipment.
 In case of injuries associated with consumables and auxiliary materials, consult a
physician and indicate the material involved.
Keep the safety data sheet for the causative material available.
Slip hazard
Slip hazard due to spilled consumables

Clean up escaped consumable materials immediately.

Avoid direct contact with consumables. Wear personal protective equipment.
Prerequisites

The compressor is shut down.

The compressor is electrically disconnected.

The main disconnect switch is switched to OFF and secured against restarting.

The compressor is not pressurized.

Liquids and greases are removed to the greatest extent possible.
Electric shock
Deadly electrical voltage

Work on the electrical equipment may be performed only by authorized electrical
technicians.
1. Disconnect the feed cables. See wiring diagram.
2. Remove the feed cables.
3. Apply seal plugs to the feed line openings.
Removing the pipework
1. Disconnect the compressed air connection.
2. Disconnect the condensate drain lines.
3. Allow the condensate to drain out completely.
4. Clean up any escaped condensate immediately.
Draining the lubricating oil
1. Open the enclosure, create access.
2. Place a suitable container below the oil drain.
3. Open the drain valve and allow oil to drain out completely. Dispose of the lubricating oil.
4. Close the drain valve.
5. Close the enclosure.
WARNING
CAUTION
DANGER
13-25-640 v00 Page 65