Storage; Installation - Gardner Denver L Series Original User And Service Manual

Hide thumbs Also See for L Series:
Table of Contents

Advertisement

Weights
The following values are approximate. They apply to the screw compressor unit, including oil fill:
Air Cooled Systems
L160
L200
L250
L290
L160RS
L200RS
L250RS
L290RS
4.2

Storage

Storing compressors.
The compressor should be stored in a dry area, heated if possible. This applies especially to the winter
months.
Damage to property
Damage to property due to exceeding the permissible temperature range
 Where there is a risk that the permissible temperature limits of +2°C to +65°C / +36°F to +149°F
could be exceed or underrun, contact Gardner Denver.
Corrosion protection
All compressors are protected at the factory against corrosion for shipping and short-term storage prior to
commissioning. If compressors are stored for longer than 6 months, additional preventive measures must be
taken.
Compressors that will be out of service for an extended period of time must also be protected against corrosion.
4.3

Installation

Requirements for the installation site
The compressor must be installed with full contact on a foundation with sufficient structural strength. The
bearing surface must be level to within 3mm / 0.12".
The installation site (compressor room) should be of sufficient size that on side ("A") a clearance of 1m / 39"
and on side ("B") a clearance of 1.5m / 59" may not be undershot. The clearance above the compressor
should be 1.5m / 59" at least. There should also be appropriate access space for maintenance work.
Figure 4-2 Installation / Clearances
Weight
4186 kg / 9229 lbs.
4415 kg / 9733 lbs.
4625 kg / 10196 lbs.
4650 kg / 10251 lbs.
4378 kg / 9652 lbs.
4573 kg / 10082 lbs.
4669 kg / 10293 lbs.
4684 kg / 10326 lbs.
NOTICE
13-25-640 v00
Water Cooled Systems
L160
L200
L250
L290
L160RS
L200RS
L250RS
L290RS
 Set up the compressor so that there is
sufficient access and that the required cooling
is ensured.
 Do not block the air inlet.
Avoid moisture.
Page 28
Weight
4120 kg / 9083 lbs.
4330 kg / 9456 lbs.
4490 kg / 9899 lbs.
4490 kg / 9899 lbs.
4270 kg / 9414 lbs.
4460 kg / 9832 lbs.
4490 kg / 9899 lbs.
4520 kg / 9965 lbs.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L160-290cLrs160-290c

Table of Contents