˙MAC Clone
If your ISP restricts service to PCs only, use the MAC Clone feature to copy a PC Media
Access Control (MAC) address to your router. This procedure will cause the router to appear
as a single PC, while allowing online access to multiple computers on your network. The MAC
Clone screen is shown in the figure below.
To clone the MAC address:
1. Type a PC MAC Address in the WAN Port Mac Address field. You may need to use the
Ethernet MAC Address of the Network Interface Card (NIC) from the PC that is registered
with your ISP.
2. Click Mac Clone to put your changes in effect, or click Restore to undo your changes.
43