CNET CWR854 User Manual page 20

To set WEP keys:
1. To enable Wireless encryption function (recommended), select the Enable button and click "Set
WEP Keys" button. The Set WEP Keys window is shown in the figure below.
2. In the Set WEP Keys window, select the Encryption Level (64 Bit or 128 Bit).
Note: Although 128 Bit encryption uses a more secure encryption algorithm, it can slow
down your network's data transmission rates.
3. Specify WEP keys by entering a Passphrase and clicking Generate, or by manually typing up
to four keys. Use the Clear Keys button to delete any unwanted key information.
4. Select the Default TX Key from the drop-down list. This value will determine the default
encryption key to be used.
5. Click Apply to put your changes in effect, or click Cancel to undo your changes.
6. Close the window when you are finished.
20