Log - CNET CWR854 User Manual

˙Log
Use the Log screen to set up and view log files that record the access activity of LAN and WAN clients.
.
The Log screen is shown in the figure below
To set up logging on your router:
1. Click Enable for Access Log on the Log screen.
2. Click Apply to put your changes in effect, or click Cancel to undo your changes.
Session Event Log
Click Session Event Log to launch the Session Event Log window. In this screen, the Session
Event Log Table lists session event entries. The table shows the Index number, Transport Type,
Source IP, Source Port, Destination IP, Destination Port, and Terminate Reason for each event.
You can click Refresh to see the latest data. Make sure to close the window when you are finished
looking at the log.
The Session Event Log is shown in the figure below.
Block Event Log
Click Block Event Log to launch the Block Event Log window. In this screen, the Block Event Log
Table lists blocking event entries. The table shows the Index number, Transport Type, Source IP,
29