1. Manuals
  2. Brands
  3. CNET Manuals
  4. Network Router
  5. CWR-935M
  6. User manual

CNET CWR-935M User Manual

Wireless-n mobile router
Hide thumbs Also See for CWR-935M:
Table of Contents

Advertisement

Quick Links

CWR-935M
Wireless-N Mobile Router

User Manual

Version 1.0
(Jun, 2009)
1

Advertisement

Table of Contents
loading

Related Manuals for CNET CWR-935M

Summary of Contents for CNET CWR-935M

  • Page 1: User Manual

    CWR-935M Wireless-N Mobile Router User Manual Version 1.0 (Jun, 2009)

  • Page 2: Table Of Contents

    Preface ............................7 Chapter 1. Introduction ......................8 About CWR-935M ....................8 Main Features ......................8 System Requirements ....................8 Getting to Know CWR-935M ................... 9 1.4.1 LED indication ......................9 1.4.2 The Right Side ......................10 1.4.3 The Bottom Side ..................... 10 Chapter 2.
  • Page 3 4.2.7 Quick Setup Complete .................... 39 4.2.8 Application Setup ....................39 4.2.9 Folder Management ....................40 4.2.10 Partition / Format SysDisk ..................40 4.2.11 User Account Management ................... 40 4.2.12 FTP Server ......................41 4.2.13 Printer Setup ......................42 4.2.14 Webcam Server ......................
  • Page 4 5.1.1.5 WAN Access Type – Dynamic IP ................71 5.1.1.6 WAN Access Type – PPTP ..................73 5.1.2 LAN Interface Setup ....................75 5.1.3 Dynamic DNS Setting ....................77 Wireless Setup ....................... 78 5.2.1 Wireless Basic Settings ................... 79 5.2.1.1 Multiple APs ......................
  • Page 5 6.1.2 LAN Interface Setup ..................... 146 Wireless Setup ..................... 148 6.2.1 Wireless Basic Setting ..................149 6.2.2 Wireless Advanced Settings ................. 153 6.2.3 Wireless Security Setup ..................154 6.2.4 Wireless Access Control ..................156 6.2.5 WDS Setting ......................160 6.2.6 WPS ........................
  • Page 6 7.3.3.1 Webcam Server Basic Setting ................231 7.3.3.2 Webcam Server Advanced Setting ............... 232 7.3.3.3 Application of Webcam ..................233 7.3.3.4 Printer Server ....................... 238 7.3.3.5 Printer Setting for PC .................... 238 System Management ................... 247 7.4.1 Change Password ....................248 7.4.2 Firmware Upgrade ....................

  • Page 7: Preface

    This manual includes description of the management interface and detailed instruction in its use. Conventions Used • Notes, warnings or cautions are in bold with shaded background. • In this manual, the CWR-935M Mini 3.5G Plus Wireless-N Server Router is referred to as “the wireless router”.

  • Page 8: Chapter 1. Introduction

    Introduction 1.1 About CWR-935M CWR-935M is a compact 3.5G wireless router providing fast, reliable and easy Internet access for every occasion. For Internet access, the router supports both 3.5G mobile standards as well as Cable/DSL Internet connections. Mobile users can access and share their 3.5G connection anywhere their 3.5G service is available.

  • Page 9: Getting To Know Cwr-935M

    Safari web browser). • An available AC power socket. 1.4 Getting to Know CWR-935M 1.4.1 LED indication LED Name Light Status Color Description Wireless LAN active WIRELESS Green Blinking Wireless LAN activity (Transferring or receiving data) LAN port is connected...

  • Page 10: The Right Side

    1.4.2 The Right Side Item Description Operation Mode Operation mode switch, user can select Router, AP, Wi-Fi AP mode 1.4.3 The Bottom Side Item Description USB Port User can connect 3.5G USB dongle, USB hard driver, USB printer or Web WAN Port Wide Area Network (WAN / Internet) Port LAN Port...

  • Page 11: Chapter 2. System And Network Setup

    Chapter 2. System and Network Setup The CWR-935M is an easy to carry and wireless device for business men. It can be used in conference room, hotel, even at hotspots. CWR-935M is small and light, with various functions; use switch to change mode between Router, AP, and Wi-Fi AP mode.

  • Page 12: Build Network Connection For Wi-Fi Ap Mode

    2.3 Build network connection for Wi-Fi AP Mode In Wi-Fi AP mode, CWR-935M becomes a bridge; users can use wireless way to connect to CWR-935M. Administrator can config LAN, Wireless network, NTP, password, USB drives, user accounts, FTP server, webcam, printer server, and SAMBA, etc.

  • Page 13: Windows 95/98/Me Ip Address Setup

    Before you can connect to the router and start configuration procedures, your computer must be able to get an IP address automatically (use dynamic IP address). If it’s set to use static IP address, or you’re unsure, please follow the following instructions to configure your computer to use dynamic IP address: If the operating system of your computer is….

  • Page 14: Windows 2000 Ip Address Setup

    2. Select ‘Obtain an IP address from a DHCP server’, then click ‘OK’. 2.4.2 Windows 2000 IP address setup: Click ‘Start’ button (it should be located at lower-left corner of your computer), then click control panel. Double-click Network and Dial-up Connections icon, double click Local Area Connection, and Local Area Connection Properties window will appear.
  • Page 15 Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address automatically’, then click ‘OK’.

  • Page 16: Windows Xp Ip Address Setup

    2.4.3 Windows XP IP address setup: 1. Click ‘Start’ button (it should be located at lower-left corner of your computer), then click control panel. Double-click Network and Internet Connections icon, click Network Connections, then double-click Local Area Connection, Local Area Connection Status window will appear, and then click ‘Properties’...

  • Page 17: Windows Vista Ip Address Setup

    2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address automatically’, then click ‘OK’. 2.4.4 Windows Vista IP address setup: 1. Click ‘Start’ button (it should be located at lower-left corner of your computer), then click control panel. Click View Network Status and Tasks, then click Manage Network Connections..Right-click Local Area Netwrok, then select ‘Properties’.
  • Page 18 2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address automatically’, then click ‘OK’.

  • Page 19: Router Ip Address Lookup

    2.4.5 Router IP address lookup After the IP address setup is complete, please click ‘start’ -> ‘run’ at the bottom-lower corner of your desktop: Input ‘cmd’, then click ‘OK’...
  • Page 20 Input ‘IP config’, then press ‘Enter’ key. Please check the IP address followed by ‘Default Gateway’ (In this example, the IP address of router is 192.168.1.1) NOTE: If the IP address of Gateway is not displayed, or the address followed by ‘IP Address’ begins with ‘169’, please recheck network connection between your computer and router, and / or go to the beginning of this chapter, to recheck every step of network setup procedure.
  • Page 21 Please click “Administrator” to login the CWR-935M Please input user name and password in the field respectively, default user name is ‘admin’, and default password is ‘admin’, then press ‘Login’ button, and you can see the web management interface of this router: NOTE: If you can’t see the web management interface, and you’re being prompted to input...

  • Page 22: Chapter 3. One Button Setup Configuration

    Chapter 3. One Button Setup Configuration CWR-935M provides ‘One Button Setup’ function, users can finish settings in a single page. After users switch modes and reboot the machine, they will enter this page to finish configurations. 3.1 One Button Setup for Router Mode Please click “One Button Setup”...
  • Page 24 Item Description Please press button, a drop-down list will be shown, and you can Time Zone Select choose a time zone of the location you live. Change Password Please input new password here Device Name Please input new device name here WAN Interface Setup Please choose the broadband interface you are using WAN Type Setup...

  • Page 25: One Button Setup For Ap Mode

    3.2 One Button Setup for AP Mode...

  • Page 26: One Button Setup For Wi-Fi Ap Mode

    Item Description Please press button, a drop-down list will be shown, and you can Time Zone Select choose a time zone of the location you live. Change Password Please input new password here Device Name Please input new device name here Wireless Setup You can configure Wireless SSID and Security Partition / Format SysDisk...

  • Page 28: Chapter 4. Quick Setup One Button Setup Configuration

    Quick Setup One Button Setup Configuration There are two way to connect to CWR-935M setup page. A. Use Internet browser to connect to CWR-935M 1. Please open your Internet browser, like IE, and input the CWR-935M IP address, http://192.168.1.1 Click “Administrator”...
  • Page 29 Login page will shown as below, and enter username and password. The username is “admin”, the password is “admin”, then click “Login” to enter CWR-935N main page. B. Use UPnP to connect to CWR-935M CWR-935M default enable UPnP function, you can find the icon in the right down corner, when you connect to CWR-935M.

  • Page 30: Router Mode Configuration

    NOTE: Please click the “Finish” button to save all configuration data. CWR-935M supports wire or wireless connecting type with ISP. It also has NAT and DHCP functions to let multiple computers using network at the same time. Wireless WAN supports Site Survey.

  • Page 31: Quick Setup For Router Mode

    4.2 Quick Setup for Router Mode Click on Step Setup in the left screen of the main menu. Then you’ll see the “Basic Setup” and “Application Setup”. Please click “Basic Setup” then click “Next>>” to start configure your CWR-935M. 4.2.1 Time Zone Setup Item...

  • Page 32: Lan Interface Setup

    Device IP address, you can change CWR-935M IP Address After you finish all setting, please click “Next>>” button. 4.2.3 WAN Setup CWR-935M supports three WAN interface and four WAN access type, After you finish all setting, please click “Next>>” button.

  • Page 33: Wan Interface - Ethernet Port

    4.2.3.2 WAN Interface – Wireless If CWR-935M connects to the Internet through wireless, please select Wireless. The Wireless network which searched by CWR-935M will display on this page. Please select the wireless network and Encryption type to connect. 4.2.3.3 WAN Access Type – Static IP If your ISP provides static IP, and you do not need to enter username and password, please select “Static IP”.

  • Page 34: Wan Access Type - Dhcp Client

    Please input the related information by your service provider 4.2.3.4 WAN Access Type – DHCP Client Please select “Dynamic I”P to obtain IP address automatically from your ISP. You can use the “3.5G Backup” for redundancy.

  • Page 35: Wan Access Type - Pppoe

    4.2.3.5 WAN Access Type – PPPoE Please select “PPPoE ” and input the username and password by your Internet Service Provider. You can use the “3.5G Backup” for redundancy. Please input the related information by your service provider...

  • Page 36: Wan Access Type - Pptp

    4.2.3.6 WAN Access Type – PPTP Please select “PPPTP ” and input the related information by your Internet Service Provider. You can use the “3.5G Backup” for redundancy. Please input the related information by your service provider...

  • Page 37: G Setup

    If the device can not detect 3.5G signal, it will search 3 / 2.75 / 2.5G signal, until there is no signal. 4.2.5 Wireless Setup The first step to setup wireless interface is to assign SSID, the default name is CWR-935M. Please follow the instructions to setup.

  • Page 38: Wireless Security Setup

    4.2.6 Wireless Security Setup It’s very important to set wireless security settings properly! If you don’t, hackers and malicious users can reach your network and valuable data without your consent and this will cause serious security problem. a. Encryption -- WEP Item Description There are two types of WEP key length: 64-bit and 128-bit.

  • Page 39: Quick Setup Complete

    Item Description Passphrase: The Pre-Shared Key format is ASCII Code, and the length is 8-63 bytes(at least 8 bytes)。 Pre-Shared Key Format Hex: Users can input 64 Hex bytes(0~9, a~f, or A~F)。 Please click “Finished>>” to finish setup. 4.2.7 Quick Setup Complete When you see this screen, the quick setup is completed.

  • Page 40: Folder Management

    4.2.9 Folder Management Easy to check all the USB storage devices connected to your CWR-935M, view the entire data folder inside each storage devices, and you can do the disk formatting via click on the button in this page. 4.2.10 Partition / Format SysDisk Select the USB Disk and click on “OK”...

  • Page 41: Ftp Server

    4.2.12 FTP Server CWR-935M can be the FTP Server provides users to transmit files, also for the guest can download the files from assign website. Moreover, by connecting USB HDD, USB Flash to the router, user can easily set up a FTP Server to share or download files for local or remote users.

  • Page 42: Printer Setup

    Webcam Server If you plan to use the CWR-935M as a Web Camera site, connect a supported USB Web Camera to the USB port. Enable the webcam server and access from WAN as demand, and the Image format is set to 320X240.

  • Page 43: Samba Server

    The AP mode doesn’t support NAT. The CWR-935M is simply using Ethernet port to connect to the upper level device and receive the IP address from it. The CWR-935M will use the default IP address or is defined by users if the upper level device does not give one.
  • Page 44 2. Select ‘Use the following IP address’ and fill the IP address and Subnet mask, then click ‘OK’.

  • Page 45: Quick Setup For Ap Mode

    4.4 Quick Setup for AP Mode 1. Open your Internet Browser and enter http://192.168.1.254. 2. Please click “Administrator” to login the CWR-935M...
  • Page 46 3. Enter the username and password, the username is admin, password is admin...

  • Page 47: Time Zone Setup

    4. Click on Step Setup in the left screen of the main menu. Then you’ll see the “Basic Setup” and “Application Setup”. Please click “Basic Setup” then click “Next>>” to start configure your CWR-935M. 4.4.1 Time Zone Setup Item Description...

  • Page 48: Wireless Setup

    4.4.2 Wireless Setup The first step to setup wireless interface is to assign SSID, the default name is 3.5G_Server_Router. Please follow the instructions to setup. 4.4.3 Wireless Security Setup It’s very important to set wireless security settings properly! If you don’t, hackers and malicious users can reach your network and valuable data without your consent and this will cause serious security problem.
  • Page 49 format, you’ll see the message at the right of ‘Key Format’ is ‘Hex (10 characters), which means the length of WEP key is 10 characters. b. Encryption – WPA (WPA, WPA2, WPA2 Mixed) WPA (Wi-Fi Protected Access) is a system to protect wireless network security. To prevent hackers, WPA uses TKIP or AES to change key frequently.

  • Page 50: Quick Setup Complete

    Setup. 4.4.6 Folder Management Easy to check all the USB storage devices connected to your CWR-935M, view the entire data folder inside each storage devices, and you can do the disk formatting via click on the button in this page.

  • Page 51: Partition / Format Sysdisk

    Please click “Next>>” to continue setup 4.4.9 FTP Server CWR-935M can be the FTP Server provides users to transmit files, also for the guest can download the files from assign website. Moreover, by connecting USB HDD, USB Flash to the router, user can easily set up a FTP Server to share or download files for local or remote users.

  • Page 52: Printer Setup

    Webcam Server If you plan to use the CWR-935M as a Web Camera site, connect a supported USB Web Camera to the USB port. Enable the webcam server and access from WAN as demand, and the Image format is set to 320X240.

  • Page 53: Samba Server

    The AP mode doesn’t support NAT. The CWR-935M is simply using Ethernet port to connect to the upper level device and receive the IP address from it. The CWR-935M will use the default IP address or is defined by users if there is no DHCP server in your network.
  • Page 55 2. Select ‘Use the following IP address’ and fill the IP address and Subnet mask, then click ‘OK’.

  • Page 56: Quick Setup For Wi-Fi Ap Mode

    4.6 Quick Setup for Wi-Fi AP Mode 5. Open your Internet Browser and enter http://192.168.1.254. 6. Please click “Administrator” to login the CWR-935M 7. Enter the username and password, the username is admin, password is admin 8. Click on Step Setup in the left screen of the main menu. Then you’ll see the “Basic Setup” and “Application Setup”.

  • Page 57: Quick Setup For Wi-Fi Ap Mode

    4.7 Quick Setup for Wi-Fi AP Mode Click on Step Setup in the left screen of the main menu. Then you’ll see the “Basic Setup” and “Application Setup”. Please click “Basic Setup” then click “Next>>” to start configure your CWR-935M.

  • Page 58: Time Zone Setup

    4.7.1 Time Zone Setup Item Description Enable NTP Client update Device will auto synchronize with NTP server Please press button, a drop-down list will be shown, and you can Time Zone Select choose a time zone of the location you live. Please press button, a drop-down list will be shown, and you can NTP Server...
  • Page 59 You can select the desired AP to connect and data encryption type. Click the Refresh button will refresh the list.

  • Page 60: Wireless Security Setup

    4.7.3 Wireless Security Setup It’s very important to set wireless security settings properly! If you don’t, hackers and malicious users can reach your network and valuable data without your consent and this will cause serious security problem. a. Encryption -- WEP Item Description There are two types of WEP key length: 64-bit and 128-bit.

  • Page 61: Quick Setup Complete

    Item Description Passphrase: The Pre-Shared Key format is ASCII Code, and the length is 8-63 bytes(at least 8 bytes)。 Pre-Shared Key Format Hex: Users can input 64 Hex bytes(0~9, a~f, or A~F)。 Please click “Finished>>” to finish setup. 4.7.4 Quick Setup Complete When you see this screen, the quick setup is completed.

  • Page 62: Folder Management

    4.7.6 Folder Management Easy to check all the USB storage devices connected to your CWR-935M, view the entire data folder inside each storage devices, and you can do the disk formatting via click on the button in this page. 4.7.7 Partition / Format SysDisk Select the USB Disk and click on “OK”...

  • Page 63: Ftp Server

    Please click “Next>>” to continue setup 4.7.9 FTP Server CWR-935M can be the FTP Server provides users to transmit files, also for the guest can download the files from assign website. Moreover, by connecting USB HDD, USB Flash to the router, user can easily set up a FTP Server to share or download files for local or remote users.

  • Page 64: Printer Setup

    Webcam Server If you plan to use the CWR-935M as a Web Camera site, connect a supported USB Web Camera to the USB port. Enable the webcam server and access from WAN as demand, and the Image format is set to 320X240.

  • Page 65: Samba Server

    CWR-935M support file sharing, you can share your file via network neighbor. Please click “Finished>>” to finish setup procedure. Chapter 5. Advanced Configuration for Router Mode IP Config This section can let users add route rules of CWR-935M, it includes configuration of WAN, LAN, and DDNS. 5.1.1 WAN Interface Setup...

  • Page 66: Wan Interface - Ethernet Port

    Wireless, 3.5G USB Dongle) and 4 access types (Static IP, Dynamic IP, PPPoE, and PPTP); please follow the instructions to configure. 5.1.1.1 WAN Interface – Ethernet Port If CWR-935M is connecting to the Internet through the Ethernet cable, please select Ethernet port interface.

  • Page 67: Wan Interface - 3.5G Usb Dongle

    5.1.1.2 WAN Interface – 3.5G USB Dongle If you use 3.5G connect to Internet, please choose “3.5G usb dongle”. 3.5G connection (Connection Mode) means that users use 3.5G connect to network. The Backup of Connection is not available at this time. If the device can not detect 3.5G signal, it will search 3 / 2.75 / 2.5G signal, until there is no signal.

  • Page 68: Wan Interface - Wireless

    5.1.1.3 WAN Interface – Wireless If CWR-935M is connecting to the Internet through wireless, please select Wireless interface.

  • Page 69: Wan Access Type - Static Ip

    The Wireless network which searched by CWR-935M will display on this page. Users can select the desired wireless network and Encryption type to connect. 5.1.1.4 WAN Access Type – Static IP If your WAN access type is Static IP, please complete the settings as following instructions.
  • Page 70 3 mins. When system detects disconnection, 3.5G Backup CWR-935M will automatically connect by using 3.5G. If the signal of 3.5G is not detected, it will search for 3/2.75/2.5G signals. Users will turn off 3.5G connection manually after the original connection is restored.

  • Page 71: Wan Access Type - Dynamic Ip

    Reset to clear all the input data. 5.1.1.5 WAN Access Type – Dynamic IP If your WAN access type is Static IP, please complete the settings as following instructions.
  • Page 72 3 mins. When system detects disconnection, 3.5G Backup CWR-935M will automatically connect by using 3.5G. If the signal of 3.5G is not detected, it will search for 3/2.75/2.5G signals. Users will turn off 3.5G connection manually after the original connection is restored.

  • Page 73: Wan Access Type - Pptp

    5.1.1.6 WAN Access Type – PPTP If your WAN access type is PPTP, please complete the settings as following instructions.
  • Page 74 3 mins. When system detects disconnection, 3.5G Backup CWR-935M will automatically connect by using 3.5G. If the signal of 3.5G is not detected, it will search for 3/2.75/2.5G signals. Users will turn off 3.5G connection manually after the original connection is restored.

  • Page 75: Lan Interface Setup

    Protocol multicast groups. IGMP is used by IP hosts and adjacent multicast routers to establish multicast group memberships. You can choose to enable IGMP Proxy to provide service. When users enable Enable Ping Access on WAN, it will make WAN IP address response to any ping request from Internet users.
  • Page 76 Please enter the Default Gateway address. If you don’t know the Default Gateway address, please contact your ISP. Users can choose to enable DHCP service or not. The DHCP server will give an unused IP address to a computer which is requesting for DHCP one.

  • Page 77: Dynamic Dns Setting

    5.1.3 Dynamic DNS Setting Dynamic DNS provides users with DNS service that automates the discovery and registration of client's public IP addresses. The DDNS Providers in 3.5G server router are DynDNS (http://www.dyndns.com), TZO (http://www.dyndns.org), ChangeIP, Eurodns, OVH, NO-IP, ODS, Regfish. Please choose to enable it or not.

  • Page 78: Wireless Setup

    Wireless Setup The category includes Basic Settings, Advanced Settings, Security, Access Control, WDS settings, and WPS. Please read below for the setting instruction.

  • Page 79: Wireless Basic Settings

    5.2.1 Wireless Basic Settings The basic settings related to the wireless are specified as following. Item Description Disable Wireless LAN Turn off the wireless function. Interface Please select the frequency. It has 6 options: 2.4 GHz Band (B/G/N/B+G/G+N/B+G+N). Please select the mode. It has 3 modes to select:(AP, Client, WDS, AP+WDS).

  • Page 80: Multiple Aps

    Please check Section 5.2.1.1 Service Set identifier, the default SSID is CWR-935M, users can SSID define to any. Channel Width Please select the channel width, it has 2 options: 20MHZ, and 40MHZ. Enable this function will control your router use lower or upper Control Sideband channel.

  • Page 81: Enable Universal Repeater Mode (Acting As Ap Client Simultaneously)

    Item Description Enable Please choose to enable it ot not Band Please select the frequency. SSID Please enter the SSID. Data Rate Please select the data transmission rate. Enable this function can let clients use two access types: a. LAN+WAN: the client Access can access to the Internet and connect to 3.5G server router’s GUI to setup.

  • Page 82: Wireless Advanced Settings

    Users can go to the network Config section and check the information of upper level in Wireless Repeater Interface Configuration. If the bottom layer device is trying to make a connection, users must input the SSID of this router as a relay station.
  • Page 83 Item Description To identify the maxima length of packet, the over length packet will be Fragment Threshold fragmentized. The allowed range is 256-2346, and default length is 2346 This value should remain at its default setting of 2347. The range is 0~2347. Should you encounter inconsistent data flow, only minor modifications are recommended.

  • Page 84: Wireless Security Setup

    5.2.3 Wireless Security Setup CWR-935M provides four encryption types; you can select here, please follow below instructions for the setting. 1. Encryption -- WEP Key 1.1 Set WEP Key: This section provides 64bit and 128bit WEP encryptions for wireless network.
  • Page 85 Personal (Pre-Shared Key) Pre-Shared Key type is ASCII Code; the length is between 8 to 63 characters. If the key type is Hex, the key length is 64 characters 3. Apply Change & Reset : Click on ‘Apply Changes’ to save setting data. Or click ‘Reset’ to clear all the input data.

  • Page 86: Wireless Access Control

    5.2.4 Wireless Access Control The function of access control is to allow or deny users to access 3.5G server router by according MAC address, it is optional. If you select Allowed Listed, then only those clients whose MAC address is listed on access control can connect to your base station.
  • Page 87 (2) You will find out that the MAC address appears on Current Access Control List, it means the initiation is completed.

  • Page 88: Wds Settings

    (3) Please open wireless card UI and try to connect to this router. You will find out that the connection request will be denied. 5.2.5 WDS Settings Wireless basic settings must enable WDS first. This function can communicate with other APs by adding MAC address into the same channel.
  • Page 89 *The following figure is the explanation.
  • Page 90 *Please follow the instructions to setup the connection. (1) Please check the MAC address and Channel number of the upper level device. (2) Enter the Wireless Basic Settings page, select AP+WDS mode, and then select the Channel Number. Click Apply Changes to save the setting data.
  • Page 91 (3) Enter the WDS Settings page, select Enable WDS, and then input the MAC address of the upper level device. Click Apply Changes to save the setting data.
  • Page 92 (4) When the time counts down to 0, you will see the MAC address of the upper level device displaying on Current WDS AP List.
  • Page 93 (5) Head back to LAN Interface, disable DHCP option, and then click Apply Changes to save the setting data.
  • Page 94 (6) The MAC address of the upper level device is going to setup like the MAC address of the router. Enter the upper level device’s WDS settings page, and input router’s MAC address. Click Apply Changes to save the setting data. Please input the MAC address of this router.
  • Page 95 (7) After initiating the upper level device, please check Local Area Connections. Click Supports to check out the IP address which is assigned by upper level device. (8) You can input http://192.168.1.1 in IE browser to enter the GUI page of upper level device and make sure the connection.

  • Page 96: Wps

    5.2.6 WPS Wi-Fi Protected Setup, it can simplify the procedures of wireless encryption between CWR-935M and wireless network card. If the wireless network card also supports WPS function, users can activate WPS auto-encryption to speed up the procedures. WPS supports 2 models: PIN (Personal Information Number) and PBC (Push Button Configuration).
  • Page 97 On the other hand, users need to input the information of the wireless card into the register interface. It might lead to the failure of connection, if users make mistakes on inputting. On PBC model, users only need to click the WPS button on both sides to make a connection. It is easier to operate. This page supports Start PBC and Start PIN;...
  • Page 98 (3) Open the configuration page of the wireless card which supports WPS. Click the Wi-Fi Protect Setup, and then click PBC to make a WPS connection with AP from the WPS AP list (PBC-Scanning AP).
  • Page 99 (3) Dongle starts WPS process. (3) After finish WPS configure successful, Wireless USB Dongle will get network information from CWR-935M. It means the WPS connection between wireless card and CWR-935M is established.
  • Page 100 (1.) Please open the configuration page of the wireless card to get a PIN number, and write it down. (2) Open the Wi-Fi Protected Setup configuration page of CWR-935M, input the PIN number from the Wireless card then click Start PIN.
  • Page 101 (3) Click OK to starts process. (4) Open the configuration page of the wireless card which supports WPS. Click the PIN to make a WPS connection with AP from the WPS AP list (PIN-Begin associating to WPS AP).
  • Page 102 (5) Click No, then USB Dongle starts WPS Process. (5) WPS process. . (6) When you see the following page, USB Dongle already connect to CWR-935M via WPS function.

  • Page 103: Nat

    5.3 NAT 5.3.1 Visual Server Port forwarding service is to transfer packets from specific ports to corresponding IP address on local area network.
  • Page 104 Item Description Enable Port Forwarding Please select to enable Port Forwarding service or not. IP Address Please specify the IP address which receives the incoming packets. Protocol Please select the protocol type. Port Range Please enter the port number, for example 80-80 or 20-22 Comment You can add comments for this port forwarding rule.

  • Page 105: Visual Dmz

    5.3.2 Visual DMZ It will expose the computer which users enable the DMZ settings. All packets from the Internet will be forwarding to this computer. It is useful for specific applications, but please be careful to establish it. DMZ (Demilitarized Zone) Host is a zone that is not limited by the firewall service. DMZ allows you to redirect the packets from specific IP address to WAN IP address.

  • Page 106: Firewall

    Item Description Enable DMZ It will enable the DMZ service if you select it. DMZ Host IP Address Please enter the specific IP address for DMZ host. Click on Apply Changes to save the setting data. Or you may click on Apply Change &...

  • Page 107: Port Filtering

    5.4.1 Port Filtering This function allows users to filter and manage specific ports; to limit the use of certain applications to transmit through a specific port. Port filtering helps users to improve the security of your network. Item Description Enable Port Filtering Please select Enable Port Filtering to filter ports.

  • Page 108: Ip Filtering

    *All clients inside the local area network can’t open the 80 port through this router. 5.4.2 IP Filtering This function can limit a specific IP address to access the Internet. The computer, whose IP address is listed on filter table, will be denied the access request by router. This protocol is made base on Internet Protocol and Transmission Control Protocol.

  • Page 109: Mac Filtering

    Item Description Enable IP Filtering Please select Enable IP Filtering to filter IP addresses. Local IP Address Please enter the IP address that needs to be filtered. Protocol Please select the protocol type of the IP address. Comment You can add comments for this regulation. Click on Apply Changes to save the setting data.

  • Page 110: Url Filtering

    Reset to clear all the input data. Current Filter Table It will display all ports that are filtering now. Click Delete Selected will delete the selected item. Click Delete All Delete Selected & Delete All will delete all items in this table. Rest You can click Reset to cancel.

  • Page 111: Server

    5.5 Server CWR-935M provides Samba Server, FTP Server, Web Camera Server, and Printer Server Application. 5.5.1 Samba Server Support NetBIOS Protocol, the consumer sharing file or printer which provides as the “My Network Places”. Please make sure storage devices and printers are connecting to USB ports on the router and already mounting.

  • Page 112: How To Enter The Sharing Folder

    5.5.1.1 How to enter the sharing folder Please follow below steps. Step 1: Please click the “start”, and select “Run”. Step 2: In the Address blank input the IP address: \\192.168.1.1.

  • Page 113: Ftp Server

    Step 3: Appear following menu, can open following to share internal data. Note： 1. If connected USB flash or HDD, and then enable samba server function, it will appear a samba folder. 2. If connected USB printer, and then enable printer server function, it will appear a printer icon. 5.5.2 FTP Server FTP Server utility allows both local and remote users to upload or download files, pictures or MP3 music form the same storage device.

  • Page 114: Webcam Server

    USB storage device. Please always make sure the device is formatted with FAT32 or EXT3 standard. 2. CWR-935M support USB storage up to 1TB with NTFS format and 250GB with EXT3 5.5.3 Webcam Server By connecting web camera to the router, it allows user to monitor their home or office from remote locations.

  • Page 115: Webcam Server Advanced Setting

    Item Description Enable Webcam Server Select to “Enable” or “Disable” webcam server. Allow webcam can access from WAN side by checking on Enable for this Access from WAN item Image format The format is 320 x 240 pixels Preview Click on this button, you can preview the image from webcam. Please see the detail advance setting in “5.5.3.2 Webcam Advanced Record Setting Configuration”.

  • Page 116: Application Of Web Camera

    Application of Web Camera 5.5.3.3.1 Application of Web Camera Monitor your home with a Webcam via CWR-935M. Take pictures via CWR-935M, also can do the monitoring or recording all images into the USB HDD for reviewing. Often marketed as surveillance tools for home or office security, network Webcams are now being employed by early adopters for more personal matters, such as watching kids and monitoring pets.
  • Page 117  Monitor the image via webcam from WAN Input the WAN IP Address (as you see in above screen) into browser blanks, and you will see the personal account login screen appear then input your own user account and password. After login by personal, your will see the personal control panel screen as below, please click on “My Webcam”.
  • Page 118 There will be a pop-up screen showing the image from web camera as below example. 5.5.3.3.2 Web Camera Recording 5.5.3.3.2.1 Administrator CWR-935M also can record the pictures from Webcam; only Administrator can do the settings. Select Web Camera Server from main Menu and Enable this function, click on Record setting button for further setting.
  • Page 119 To setup the Webcam Advanced Configuration for each blank and the image from webcam will be recorded into your USB HDD or Remote FTP. For administrator, you may view all the images from webcam recording, please select Folder Management and click on Disk Explorer to view entire folder inside the disk including webcam record files.
  • Page 120 After click on Disk Explorer, you will see the folder screen appear including all the folders. 5.5.3.3.2.2 Personal Application All the users under administrator’s setting can view entire webcam recording images from My Document. Please login by your own personal account. For viewing your own folder, please click on “My Document”.

  • Page 121: Printer Server

    FTP & Webcam’s privileges. 5.5.4 Printer Server The two USB ports on CWR-935M are for connection with printers to be shared on the local area network. Follow the below steps to setup your PC to connect to a Printer server.
  • Page 122 Step 1: Please go to Start > Printers and Faxes to add a printer. Step 2: Click “Add a printer”.
  • Page 123 Step 3: Click “Next”.
  • Page 124 Step 4: Click the “Local printer attached to this computer”, and then click “Next”.
  • Page 125 Step 5: Click the “Create a new port” and select the “Standard TCP/IP Port”, and then click “Next”. Step 6: Click “Next”.
  • Page 126 Step 7: Input the IP address of CWR-935M: 192.168.1.1 (Router Mode), and then click “Next”.
  • Page 127 Step 8: Select the “Custom” and click the “Settings”, and then click “Next”.
  • Page 128 Step 9: Select “LPR” and give it the same “Queue Name” as USB Printer Name as shown, and mark “LPR Byte Counting Enabled”. Finally, click on “OK” button. Must as same as printer name, please refer to “3.2.10 Printer Server Setup”...
  • Page 129 Step 10: Click the “Finish”. Step 11: Select the “Manufacturer” and “Printers”. If your printer doesn’t listed in the table, please install its driver CD and then click on “Have Disk…” button for installation. Or click on “Next” button to finish the setting.
  • Page 130 Step 12: Click on Finish button and all steps of setting printer server are completely.

  • Page 131: System Management

    5.6 System Management It has 6 sections: Change Password, Firmware Upgrade, Profiles Save, Time Zone Setting, UPnP Setting, and Language Setting. It is easy and helpful for users making more detailed settings. 5.6.1 Change Password Users can set or change their password in this section. Please enter the password and confirm it.

  • Page 132: Firmware Upgrade

    If you feel the router has unusual behaviors and is not caused by the ISP and environment. You can check the website (http://www.cnet.com.tw) to see if there is any later version of firmware. Download the firmware to your computer, click Browser and point to the new firmware file.

  • Page 133: Profile Save

    5.6.3 Profile Save Users can save or restore the setting profile, and reset the setting to factory default. Save to computer Reset to default. Upload the file from PC to router...
  • Page 134 a. Save Configuration (1) Click Save (2) Please click Save to save configuration to your computer.
  • Page 135 (3) Select the location which you want to save file, then click Save. b. Load configuration file (1) Click Browser...
  • Page 136 (2) Select configuration file then click Open (3) Click Upload to upload configuration file to CWR-935M.
  • Page 137 (4) After 90 seconds, CWR-935M will finish process and reboot. Please click Administrator to login (C) Reload factory default setting 1. Please click Reset...
  • Page 138 (2) Please click OK to start reload factory default setting to CWR-935M (3) After 90 seconds, CWR-935M will finish process and reboot. Please click Administrator to login...

  • Page 139: Time Zone Setting

    The goals of UPnP are to allow devices to connect seamlessly and to simplify the implementation of networks in the home (data sharing, communications, and entertainment) and in corporate environments for simplified installation of computer components. CWR-935M supports UPnP function, and can cooperate with other UPnP devices. When you activate UPnP, please click My Network Places.

  • Page 141: Language Setting

    5.6.6 Language Setting CWR-935M provides users with 12 languages to choose. Users can change the language of the interface configuration. Please click Apply Changes after selecting a language. Using Korean as an example, the screen will display on the chosen language after the countdown is finished.

  • Page 142: User Account Management

    Cancel button to clean the setting on this page. 5.6.8 Folder Management Easy to check all the USB storage devices connected to your CWR-935M, view the entire data folder inside each storage devices, and you can do the disk formatting/partition via click on the button in this...

  • Page 143: Log & Status

    1. Select the USB Disk and click on Mount button for refresh all disks before you do disk partition, and the Unplug button will appear. 2. To partition/format the disk, please select the disk and click on Format button. 3. If you want to view the data inside the disk, please click on “Disk Explorer” to view all the disks folders inside the device.

  • Page 144: Network Config

    5.7.1 Network Config Users can check the Internet status under this category, including Firmware version, Wireless setting, Connecting Time, WAN, TCP/IP …information. 5.7.2 Event Log You may enable the event log feature here. Please select to enable log function. Item Description Enable Log You may choose to enable Event Log or not...

  • Page 145: Logout

    Cancel button to clean the setting on this page. *The following figure is an example when users click Apply Changes to record the event log. 5.8 Logout This function provides users to logout.

  • Page 146: Chapter 6. Advanced Configuration For Ap Mode

    Chapter 6. Advanced Configuration for AP Mode 6.1 IP Config In this category, you can setup the IP rules under AP Mode. 6.1.1 LAN Setup Please click on LAN of IP Config and follow the below setting. 6.1.2 LAN Interface Setup This page is used to configure for local area network which connects to the LAN port of your Access Point.
  • Page 147 Item Description Device Name Name of CWR-935M IP Address The default IP address is 192.168.1.254 (recommend). Please enter the Subnet Mask address; it should be 255.255.255.0 for Subnet Mask the most time. Please enter the Default Gateway address. If you don’t know the Default Gateway address, please contact your ISP.

  • Page 148: Wireless Setup

    Wireless Setup The category includes Basic Settings, Advanced Settings, Security, Access Control, WDS settings, and WPS. Please read below for the setting instruction.

  • Page 149: Wireless Basic Setting

    Please select the mode. It has 3 modes to select: (AP, WDS, AP+WDS). Multiple APs can provide users another 4 different SSID for Mode connection. Users can add or limit the properties for each connection (Please check Note 1). SSID Service Set identifier, the default SSID is CWR-935M, users can...
  • Page 150 define to any. Please select the channel width, it has 2 options: 20MHZ, and Channel Width 40MHZ. Enable this function will control your router use lower or upper Control Sideband channel. Channel Number Please select the channel; it has Auto, 1, 2~11 options. Broadcast SSID User may choose to enable Broadcast SSID or not.
  • Page 151 Item Description Enable Please choose to enable it or not. Band Please select the frequency. SSID Please enter the SSID. Data Rate Please select the data transmission rate. Broadcast SSID User may choose to enable Broadcast SSID or not. Enable this function can let clients use 2 access types: a. LAN+WAN: the client can access to the Internet and connect to 3.5G server Access router’s GUI to setup.
  • Page 152 2. Enable Universal Repeater Mode (Acting as AP and Client simultaneously) Allow to equip with the wireless way conjunction upper level, provide the bottom layer user link in wireless and wired way in the meantime. (The IP that bottom layer obtains is from upper level.) Ex: When users enable the Universal Repeater to connect to the upper level device, please input the channel and SSID of the upper level device on router’s GUI.

  • Page 153: Wireless Advanced Settings

    6.2.2 Wireless Advanced Settings Please complete the wireless advanced settings as following instructions. Item Description To identify the maxima length of packet, the over length packet will be Fragment Threshold fragmentized. The allowed range is 256-2346, and default length is 2346 Bytes.

  • Page 154: Wireless Security Setup

    20-1024 ms. Preamble is the first subfield of PPDU, which is the appropriate frame format form transmission to PHY (Physical layer). There are two Preamble Type options, Short Preamble and Long Preamble. The Short Preamble option improves throughput performance. Select the suit Preamble as Short or Long Preamble.
  • Page 155 Encryption – WEP a. Set WEP Key This section provides 64bit and 128bit WEP encryptions for wireless network. Users can also choose ASCII and Hex shared Key format to protect data. b. 802.1x Authentication It is a safety system by using authentication to protect your wireless network. Please choose between WEP 64bits and WEP 128bits.

  • Page 156: Wireless Access Control

    b. Personal (Pre-Shared Key) Pre-Shared Key type is ASCII Code; the length is between 8 to 63 characters. If the key type is Hex, the key length is 64 characters. Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. 6.2.4 Wireless Access Control The function of access control is to allow or deny users to access 3.5G server router by according MAC address, it is optional.
  • Page 157 Take the wireless card as the example. (1) We will use Deny Listed as an example. Please select Deny Listed in Wireless Access Control Mode first, and then input the MAC address of wireless card in MAC Address field. Click Apply Changes to save the setting data.
  • Page 158 (2). You will find out that the MAC address appears on Current Access Control List, it means the initiation is completed.
  • Page 159 (3) Please open wireless card UI and try to connect to this router. You will find out that the connection Request will be denied.

  • Page 160: Wds Setting

    6.2.5 WDS Setting Wireless basic settings must enable WDS first. This function can communicate with other APs by adding MAC address into the same channel. * The following figure is the explanation.
  • Page 161 * Please follow the instructions to setup the connection. (1). Please check the MAC address and Channel number of the upper level device. (2). Enter the Wireless Basic Settings page, select AP+WDS mode, and then select the Channel Number. Click Apply Changes to save the setting data.
  • Page 162 (3.) Enter the WDS Settings page, select Enable WDS, and then input the MAC address of the upper level device. Click Apply Changes to save the setting data.
  • Page 163 (4). When the time counts down to 0, you will see the MAC address of the upper level device displaying on Current WDS AP List.
  • Page 164 (5). Head back to LAN Interface, disable DHCP option, and then click Apply Changes to save the setting data.
  • Page 165 (6.) The MAC address of the upper level device is going to setup like the MAC address of the router. Enter the upper level device’s WDS settings page, and input router’s MAC address. Click Apply Changes to save the setting data. Please input the MAC address.
  • Page 166 (7) After initiating the upper level device, please check Local Area Connections. Click Supports to check out the IP address which is assigned by upper level device. (8) You can input http://192.168.1.1 in IE browser to enter the GUI page of the upper level device and make sure the connection.

  • Page 167: Wps

    6.2.6 WPS Wi-Fi Protected Setup, it can simplify the procedures of wireless encryption between CWR-935M and wireless network card. If the wireless network card also supports WPS function, users can activate WPS auto-encryption to speed up the procedures. WPS supports 2 models: PIN (Personal Information Number) and PBC (Push Button Configuration).
  • Page 168 This page supports Start PBC and Start PIN; please follow the instructions to operate. * Start PBC: (1) Please click Start PBC to connect to the wireless network card. (2) Please click OK to start WPS process..
  • Page 169 (3) Open the configuration page of the wireless card which supports WPS. Click the Wi-Fi Protect Setup, and then click PBC to make a WPS connection with AP from the WPS AP list (PBC-Scanning AP). (3) Dongle starts WPS process.
  • Page 170 (3) After finish WPS configure successful, Wireless USB Dongle will get network information from CWR-935M. It means the WPS connection between wireless card and CWR-935M is established.
  • Page 171 * Start PIN: (1.) Please open the configuration page of the wireless card to get a PIN number, and write it down.
  • Page 172 (2) Open the Wi-Fi Protected Setup configuration page of CWR-935M, input the PIN number from the Wireless card then click Start PIN. (3) Click OK to starts process.
  • Page 173 (4) Open the configuration page of the wireless card which supports WPS. Click the PIN to make a WPS connection with AP from the WPS AP list (PIN-Begin associating to WPS AP). (5) Click No, then USB Dongle starts WPS Process.

  • Page 174: Server

    (5) WPS process. . Server CWR-935M provides Samba Server, FTP Server, Web Camera Server, and Printer Server Application. 6.3.1 Samba Server Support NetBIOS Protocol, the consumer sharing file or printer which provides as the “My Network Places”. Please make sure storage devices and printers are connecting to USB ports on the router and...

  • Page 175: How To Enter The Sharing Folder

    Input the workgroup name, default is “Workgroup”. Server Name Input the server name, default is “CWR-935M”. You can input description of the server, default is “CWR-935M Mobile Server Description Router” Click on Apply Changes to save the setting data. Or you may click on Apply Changes &...

  • Page 176: Ftp Server

    Step 2: In the Address blank input the IP address: \\192.168.1.1. Step 3: Appear following menu, can open following to share internal data. Note： 1. If connected USB flash or HDD, and then enable samba server function, it will appear a samba folder.

  • Page 177: Webcam Server

    Item Description Enable Samba Server Select to “Enable” or “Disable” FTP server. Enable Anonymous to Login Allow anonymous to login after check on Enable. The default is 21. Define the FTP command transfer service port. If FTP Server Port you want to change this port number, remember to change the service port setting of your FTP client, also.

  • Page 178: Webcam Server Basic Setting

    6.3.3.1 Webcam Server Basic Setting Item Description Enable Webcam Server Select to “Enable” or “Disable” webcam server. Image format The format is 320X240 pixels. Preview Click on this button, you can preview the image from webcam. Please see the detail advance setting in “6.3.3.2 Webcam Advanced Record Setting Configuration”.

  • Page 179: Webcam Server Advanced Setting

    6.3.3.2 Webcam Server Advanced Setting Click on “Record Setting” button, and the screen will appear as below. Item Description For saving image, you can set the save interval time, the default value Save image interval is 5 seconds. Set the save location for webcam image, you may save into USB HDD Server Location or Remote FTP;...

  • Page 180: Application Of Webcam

    Application of Webcam 6.3.3.3.1 Web Camera Monitoring Application Monitor your home with a Webcam via CWR-935M. Take pictures via CWR-935M, also can do the monitoring or recording all images into the USB HDD for reviewing. Often marketed as surveillance tools for home or office security, network Webcams are now being employed by early adopters for more personal matters, such as watching kids and monitoring pets.

  • Page 181: Web Camera Recording

    There will be a pop-up screen showing the image from web camera as below example. 6.3.3.3.2 Web Camera Recording 6.3.3.3.2.1 Administrator CWR-935M also can record the pictures from Webcam; only Administrator can do the settings. Select Web Camera Server from main Menu and Enable this function, click on Record setting button for further setting.
  • Page 182 To setup the Webcam Advanced Configuration for each blank and the image from webcam will be recorded into your USB HDD or Remote FTP.
  • Page 183 For administrator, you may view all the images from webcam recording, please select Folder Management and click on Disk Explorer to view entire folder inside the disk including webcam record files. After click on Disk Explorer, you will see the folder screen appear including all the folders.
  • Page 184 All the image files will be saved in the folder “webcam_recorded_files”. Please open the file for checking. 6.3.3.3.2.2 Personal Application All the users under administrator’s setting can view entire webcam recording images from My Document. Please login by your own personal account. For viewing your own folder, please click on “My Document”.

  • Page 185: Printer Server

    FTP & Webcam’s privileges. 6.3.4 Printer Server The two USB ports on CWR-935M are for connection with printers to be shared on the local area network. Follow the below steps to setup your PC to connect to a Printer server.
  • Page 186 Step 1: Please go to Start > Printers and Faxes to add a printer. Step 2: Click “Add a printer”.
  • Page 187 Step 3: Click “Next”. Step 4: Click the “Local printer attached to this computer”, and then click “Next”.
  • Page 188 Step 5: Click the “Create a new port” and select the “Standard TCP/IP Port”, and then click “Next”. Step 6: Click “Next”.
  • Page 189 Step 7: Input the IP address of CWR-935M: 192.168.1.254, and then click “Next”.
  • Page 190 Step 8: Select the “Custom” and click the “Settings”, and then click “Next”.
  • Page 191 Step 9: Select “LPR” and give it the same “Queue Name” as USB Printer Name as shown, and mark “LPR Byte Counting Enabled”. Finally, click on “OK” button. Must as same as printer name, please refer to “6.3.4 Printer Server Setup”...
  • Page 192 Step 10: Click the “Finish”.
  • Page 193 Step 11: Select the “Manufacturer” and “Printers”. If your printer doesn’t listed in the table, please install its driver CD and then click on “Have Disk…” button for installation. Or click on “Next” button to finish the setting.

  • Page 194: System Management

    Step 12: Click on Finish button and all steps of setting printer server are completely. System Management It has 6 sections: Change Password, Firmware Upgrade, Profiles Save, Time Zone Setting, UPnP Setting, and Language Setting. It is easy and helpful for users making more detailed settings.

  • Page 195: Change Password

    6.4.1 Change Password Users can set or change their password in this section. Please input the new password and confirm it. Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data.

  • Page 196: Firmware Upgrade

    If you feel the router has unusual behaviors and is not caused by the ISP and environment. You can check the website (http://www.cnet.com.tw) to see if there is any later version of firmware. Download the firmware to your computer, click Browser and point to the new firmware file.

  • Page 197: Profile Save

    6.4.3 Profile Save Users can save or restore the setting profile, and reset the setting to factory default. Save to computer Reset to default. Upload the file from PC to router a. Save Configuration (1) Click Save...
  • Page 198 (2) Please click Save to save configuration to your computer.
  • Page 199 (3) Select the location which you want to save file, then click Save. b. Load configuration file (1) Click Browser...
  • Page 200 (2) Select configuration file then click Open (3) Click Upload to upload configuration file to CWR-935M.
  • Page 201 (4) After 90 seconds, CWR-935M will finish process and reboot. Please click Administrator to login (C) Reload factory default setting 1. Please click Reset...
  • Page 202 (2) Please click OK to start reload factory default setting to CWR-935M (3) After 90 seconds, CWR-935M will finish process and reboot. Please click Administrator to login...

  • Page 203: Time Zone Setting

    6.4.4 Time Zone Setting This function allows users to select their time zone and NTP server. Users can adjust the time manually or through the NTP server. Please select the time zone. Item Description Current Time Users can input the time manually. Time Zone Select Please select the time zone.
  • Page 204 Network Places. Users will see an Internet Gateway Device icon. By click the icon, users can enter the GUI of 3.5G server router. If you do not wish to use UPnP, you can disable it.

  • Page 205: Language Setting

    6.4.6 Language Setting CWR-935M provides users with 12 languages to choose. Users can change the language of the interface configuration. Please click Apply Changes after selecting a language. Using Korean as an example, the screen will display on the chosen language after the countdown is finished.

  • Page 206: Folder Management

    Cancel button to clean the setting on this page. 6.4.8 Folder Management Easy to check all the USB storage devices connected to your CWR-935M, view the entire data folder inside each storage devices, and you can do the disk formatting/partition via click on the button in this page.

  • Page 207: Log & Status

    Note：You have to click on “Unplug” button before remove the USB devices. Log & Status The category provides Network Config and Event Log status for users to know the operation status. 6.5.1 Network Config Users can check the Internet status under this category, including Firmware version, Wireless setting, Connecting Time, WAN, TCP/IP …information.

  • Page 208: Event Log

    6.5.2 Event Log You may enable the event log feature here. Please select to enable log function. Item Description Enable Log You may choose to enable Event Log or not. System all, Wireless, & DoS Please select the event you want to record. Enable Remote Log You may choose to enable the remote event log or not.

  • Page 209: Logout

    Logout Click on Apply Change to logout. Chapter 7. Advanced Configuration for Wi-Fi AP Mode IP Config This section can let users add route rules of 3.5G server router; it includes configuration of LAN. 7.1.1 IP Config -- LAN...

  • Page 210: Lan Interface Setup

    7.1.2 LAN Interface Setup This page is used to configure for local area network which connects to the LAN port of your Access Point. Here users may change the setting for IP address, Subnet Mask, DHCP, etc. Item Description Device Name The name of device IP Address The default IP address is 192.168.1.254 (recommend).

  • Page 211: Wireless Setup

    If your ISP asks you to enter a specific MAC Address, please input the Clone MAC Address correct info at the column. Click on Apply Changes to save the setting data. Or you may click on Apply Change & Reset Reset to clear all the input data.

  • Page 212: Wireless Basic Setting

    In Wi-Fi AP mode only support Clint mode Please select the network type, it has 2 options: Infrastructure or Ad Network Type hoc. Service Set identifier, the default SSID is CWR-935M, users can define SSID to any. Channel Width Please select the channel width, it has 2 options: 20MHZ, and 40MHZ.
  • Page 213 Control Sideband Enable this function will control your router use lower or upper channel. Broadcast SSID User may choose to enable Broadcast SSID or not. Data Rate Please select the data transmission rate. Associated Clients Check the AP connectors and the Wireless connecting status. Enable MAC Clone (Single Clone the MAC address for ISP to identify.

  • Page 214: Wireless Advanced Settings

    Users can go to the network Config section and check the information of upper level in Wireless Repeater Interface Configuration. Caution: when users enable the wireless encryption. The upper level and lower devices can connect to each other even if their encryption types are not the same. 7.2.2 Wireless Advanced Settings Please complete the wireless advanced settings as following instructions.
  • Page 215 Item Description To identify the maxima length of packet, the over length packet will be Fragment Threshold fragmentized. The allowed range is 256-2346, and default length is 2346 Bytes. This value should remain at its default setting of 2347. The range is 0~2347.

  • Page 216: Wireless Site Survey

    7.2.3 Wireless Site Survey This function provides users to search existing wireless APs or wireless base stations from ISP. You can connect to a wireless AP manually in Wi-Fi AP mode. The designed AP will appear on SSID column in Wireless Basic Setup page. Please click on Refresh to refresh the list.
  • Page 217 1. Encryption – WEP 1.1 Set WEP Key This section provides 64bit and 128bit WEP encryptions for wireless network. Users can also choose ASCII and Hex shared Key format to protect data. 1.2 802.1x Authentication It is a safety system by using authentication to protect your wireless network. Please choose between WEP 64bits and WEP 128bits.

  • Page 218: Wireless Access Control

    2.2 Personal（Pre-Shared Key） Pre-Shared Key type is ASCII Code; the length is between 8 to 63 characters. If the key type is Hex, the key length is 64 characters. 3. Apply Changes & Reset Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data.
  • Page 219 Users may enable or disable this function. Take the wireless card as the example. (1) We will use Deny Listed as an example. Please select Deny Listed in Wireless Access Control Mode first, and then input the MAC address of wireless card in MAC Address field. Click Apply Changes to save the setting data.
  • Page 220 (2) You will find out that the MAC address appears on Current Access Control List, it means the initiation is completed. (3) Please open wireless card UI and try to connect to this router. You will find out that the connection request will be denied.

  • Page 221: Wps Setting

    7.2.6 WPS Setting Wi-Fi Protected Setup, it can simplify the procedures of wireless encryption between CWR-935M and other Wireless Router or Access Point. If your Wireless Router or Access Point also supports WPS function, users can activate WPS auto-encryption to speed up the procedures.
  • Page 222 *The following figure is the display of the front of CWR-935M. When users select a specific model on wireless base station, the clients can connect to the base by selecting the same model. The connection procedures of PIN and PBC are almost the same. The small difference between those two is: Users input the PIN of wireless card in the base station first;...
  • Page 223 (1) Please click Start PBC to connect to the other Wireless Router. (2) Please click OK to start WPS process.
  • Page 224 WPS page, and then click Start PBC to make a WPS connection. (4) Click OK to start WPS process. (5) When WPS process finish, please check the Wireless Configuration of CWR-935M, you can find CWR-935M already connect to CWR-935 via WPS.
  • Page 225 * Start PIN: (1) Please open the WPS configuration page of the CWR-935M to get a PIN number, and write it down. (2) Please click OK to start WPS process..
  • Page 226 (3) Open the configuration page of the Wireless Router, like CWR-935 which supports WPS. Click the WPS page, fill the WPS PIN code. (4) Click OK to starts process.

  • Page 227: Server

    (5) When WPS process finish, please check the Wireless Configuration of CWR-935M, you can find CWR-935M already connect to CWR-935 via WPS. Server CWR-935M provides Samba Server, FTP Server, Web Camera Server, and Printer Server Application. 7.3.1 Samba Server Support NetBIOS Protocol, the consumer sharing file or printer which provides as the “My Network Places”.

  • Page 228: How To Enter The Sharing Folder

    Workgroup Name Input the workgroup name, default is “Workgroup”. Server Name Input the server name, default is “CWR-935M”. Server Description You can input description of the server. Click on Apply Changes to save the setting data. Or you may click on Apply Changes &...
  • Page 229 Step 1: Please click the “start”, and select “My Computer”. Step 2: In the Address blank input the IP address: \\192.168.1.254.

  • Page 230: Ftp Server

    Step 3: Appear following menu, can open following to share internal data. Note： 1. If connected USB flash or HDD, and then enable samba server function, it will appear a samba folder. 2. If connected USB printer, and then enable printer server function, it will appear a printer icon. 7.3.2 FTP Server FTP Server utility allows both local and remote users to upload or download files, pictures or MP3 music form the same storage device.

  • Page 231: Webcam Server

    Item Description Enable FTP Server Select to “Enable” or “Disable” FTP server. Enable Anonymous to Login Allow anonymous to login after check on Enable. The default is 21. Define the FTP command transfer service port. If FTP Server Port you want to change this port number, remember to change the service port setting of your FTP client, also.

  • Page 232: Webcam Server Advanced Setting

    Item Description Enable Webcam Server Select to “Enable” or “Disable” webcam server. Image format The format is 320X240 pixels. Preview Click on this button, you can preview the image from webcam. Please see the detail advance setting in “6.3.3.2 Webcam Record Setting Advanced Configuration”.

  • Page 233: Application Of Webcam

    Application of Webcam 7.4.3.3.1 Web Camera Monitoring Application Monitor your home with a Webcam via CWR-935M. Take pictures via CWR-935M, also can do the monitoring or recording all images into the USB HDD for reviewing. Often marketed as surveillance tools for home or office security, network Webcams are now being employed by early adopters for more personal matters, such as watching kids and monitoring pets.
  • Page 234 There will be a pop-up screen showing the image from web camera as below example.
  • Page 235 7.4.3.3.2 Web Camera Recording 7.4.3.3.2.1 Administrator CWR-935M also can record the pictures from Webcam; only Administrator can do the settings. Select Web Camera Server from main Menu and Enable this function, click on Record setting button for further setting. To setup the Webcam Advanced Configuration for each blank and the image from webcam will be recorded into your USB HDD or Remote FTP.
  • Page 236 After click on Disk Explorer, you will see the folder screen appear including all the folders.
  • Page 237 All the image files will be saved in the folder “webcam_recorded_files”. Please open the file for checking. 7.4.3.3.2.2 Personal Application All the users under administrator’s setting can view entire webcam recording images from My Document. Please login by your own personal account. For viewing your own folder, please click on “My Document”.

  • Page 238: Printer Server

    FTP & Webcam’s privileges. 7.3.3.4 Printer Server The two USB ports on CWR-935M are for connection with printers to be shared on the local area network. Follow the below steps to setup your PC to connect to a Printer server. Item...
  • Page 239 Step 1: Please go to Start > Printers and Faxes to add a printer. Step 2: Click “Add a printer”.
  • Page 240 Step 3: Click “Next”. Step 4: Click the “Local printer attached to this computer”, and then click “Next”.
  • Page 241 Step 5: Click the “Create a new port” and select the “Standard TCP/IP Port”, and then click “Next”. Step 6: Click “Next”.
  • Page 242 Step 7: Input the IP address of CWR-935M: 192.168.1.254, and then click “Next”. Step 8: Select the “Custom” and click the “Settings”, and then click “Next”.
  • Page 244 Step 9: Select “LPR” and give it the same “Queue Name” as USB Printer Name as shown, and mark “LPR Byte Counting Enabled”. Finally, click on “OK” button. Must as same as printer name, please refer to “7.4.4 Printer Server Setup”...
  • Page 245 Step 10: Click the “Finish”.
  • Page 246 Step 11: Select the “Manufacturer” and “Printers”. If your printer doesn’t listed in the table, please install its driver CD and then click on “Have Disk…” button for installation. Or click on “Next” button to finish the setting.

  • Page 247: System Management

    Step 12: Click on Finish button and all steps of setting printer server are completely. System Management It has 6 sections: Change Password, Firmware Upgrade, Profiles Save, Time Zone Setting, UPnP Setting, and Language Setting. It is easy and helpful for users making more detailed settings.

  • Page 248: Change Password

    If you feel the router has unusual behaviors and is not caused by the ISP and environment. You can check the website (http://www.cnet.com.tw) to see if there is any later version of firmware. Download the firmware to your computer, click Browser and point to the new firmware file.
  • Page 249 Please download the firmware to your pc first, and then upload it to router. Caution: To prevent that firmware upgrading is interrupted by other wireless signals and causes failure. We recommend users to use wired connection during upgrading. Caution: The firmware upgrade will not remove your previous settings. * Reset button: On the back of this router, there is a reset button.

  • Page 250: Profile Save

    7.4.3 Profile Save Users can save or restore the setting profile, and reset the setting to factory default. Save to user pc. Upload from user pc. Reset to the factory default settings. a. Save Configuration (1) Click Save...
  • Page 251 (2) Please click Save to save configuration to your computer. (3) Select the location which you want to save file, then click Save.
  • Page 252 b. Load configuration file (1) Click Browse (2) Select configuration file then click Open...
  • Page 253 (3) Click Upload to upload configuration file to CWR-935M. (4) After 90 seconds, CWR-935M will finish process and reboot. Please click Administrator to login...
  • Page 254 (C) Reload factory default setting 1. Please click Reset (2) Please click OK to start reload factory default setting to CWR-935M...

  • Page 255: Time Zone Setting

    (3) After 90 seconds, CWR-935M will finish process and reboot. Please click Administrator to login 7.4.4 Time Zone Setting This function allows users to select their time zone and NTP server. Users can adjust the time manually or through the NTP server.

  • Page 256: Upnp Setting

    Automatically Adjust Daylight Please select to enable Automatically Adjust Daylight Saving or not. Saving Please select the NTP server from the pull-down list, or you can enter NTP Server the NTP server IP address manually. Apply Changes & Reset & Please click on Apply Changes to save the setting data.

  • Page 257: Language Setting

    7.4.6 Language Setting CWR-935M provides users with 12 languages to choose. Users can change the language of the interface configuration. Please click Apply Changes after selecting a language. Using Korean as an example, the screen will display on the chosen language after the countdown is finished.

  • Page 258: User Account Management

    Cancel button to clean the setting on this page. 7.4.8 Folder Management Easy to check all the USB storage devices connected to your CWR-935M, view the entire data folder inside each storage devices, and you can do the disk formatting/partition via click on the button in this...

  • Page 259: Log & Status

    1. Select the USB Disk and click on Mount button for refresh all disks before you do disk partition, and the Unplug button will appear. 2. To partition/format the disk, please select the disk and click on Format button. 3. If you want to view the data inside the disk, please click on “Disk Explorer” to view all the disks folders inside the device.

  • Page 260: Network Config

    7.5.1 Network Config Users can check the Internet status under this category, including Firmware version, Wireless setting, Connecting Time, WAN, TCP/IP …information. 7.5.2 Event Log You may enable the event log feature here. Please select to enable log function. Item Description Enable Log You may choose to enable Event Log or not.

  • Page 261: Logout

    * The following figure is an example when users click Apply Changes to record the event log. Logout Click on Apply Change to logout. Chapter 8. DDNS Account Setup DDNS is a service changes the dynamic IP to the static IP. For ADSL & Cable users, the settings of DDNS can solve the problem of being given the different IP by router every time.
  • Page 262 【Step 1】 Please visit the website http://www.dyndns.com/, and click on Sign Up Now. 【Step 2】 Please fulfill the requested information at the column, and click on Create Account when finished. (The information shown on the screen is for your reference only)
  • Page 263 【Step 3】 When the below window appears, you already finish the registration. Please check your E-mail box, and you will receive an e-mail from the DynDNS.
  • Page 264 【Step 4】 Please open the email sent from DynDNS. Click on the link to confirm your account. 【Step 5】 Please click on login.
  • Page 265 【Step 6】 Please click on My Services under the Account Summary for the linkage. 【Step 7】 Please click on Add Host Services.
  • Page 266 【Step 8】 Please click on Add Dynamic DNS Host. 【Step 9】 1. Please input the account you applied. 2. Please select the hostname preferred at the drop-down menu. 3. Please click on Add Host to add the name. 【Step 10】 When the below window appears, it means your hostname is created.

  • Page 267: Chapter 9. Q & A

    Chapter 9. Q & A Installation 1. Q: Where can I find the IP and MAC address of my computer? A: (1) From the Start menu, select Run, an input box will appear with a flashing cursor. Type "cmd" or "Command" in the Run box...
  • Page 268 An MS DOS Window will open, please input ipconfig /all, and then press Enter. You will see information about Ethernet adapter for Local Area Connection. • IP address (192.168.1.100)： This is the IP address of your computer. • Default Gateway (192.168.1.1) This is the Gateway IP address of your computer.

  • Page 269: Led Light

    2. Q: Where should I install the XDSL Router in a network environment? A: In a typical network environment, the router should be installed between XDSL network and Local Area Network. 3. Q: My network speed is very slow, why? A: Please make sure your network cable is less than 100m.

  • Page 270: Operating System Setting

    A: There are two ways to find it. 1: Please check with your ISP. 2: Please select Log & Status on the left menu of the 3.5G server router, and then select Network Configuration, you will see the WAN IP address. 3.
  • Page 271 2. Check out the IP address, Subnet Mask, and Default Gateway. If the data is incorrect, please input Release All, press enter, and then input Renew All. Windows NT, 2000, or XP: 1. Click Start > Run > input cmd > click OK. 2.

  • Page 272: G Server Router Setup

    3.5G Server Router Setup 1. Q: Why does the setting page of the 3.5G server router will automatically shut down without any warning? A: Please click on Logout first > Close your browser > Re-open the browser > login the administration page.

  • Page 273: Wireless Network

    Wireless Network 1. Q: After the inspection, I still can not use wireless connection with my notebook. A: Sometimes the wireless network settings are very complicated. Especial when you manage the encryption system of different products. Any different password settings may cause the disconnection with other clients.
  • Page 274  If the WEP of wireless router is enabled, your computer also needs to activate WP. The key from both sides should match, too.  It might be interrupted by other radio frequency. Please check the status when close to the wireless router.

  • Page 275: Support

    6. Q: The wireless interface of WinXP is not compatible with 3.5G server router’s WEP interface. A: The default WEP of WinXP is Authentication Open System – WEP, but 3.5G server router only has Pre-Shared Key – WEP. Please change WEP of WinXP to Pre-shared Key – WEP. Support 1.

  • Page 276: Chapter 10. Appendix

    Mode Router Wi-Fi AP WAN Connect Wire Wire Wireless From Connecting SSID For User Connecting For User Connecting Access Point For Extend other For Extend other For User Connecting Extend SSID Access Point's Range Access Point's Range 4. Q: I don’t see anything in My Webcam？ A: This function needs Java support;...

Table of Contents