CNET CWR854 User Manual page 17

Hide thumbs Also See for CWR854:

Table of Contents

5. Select the Channel number

Advanced Wireless Options

Most users will not need to configure the advanced wireless options.

To configure the Advanced wireless options:

1. Type a Beacon Interval. This value represents the time interval between beacons broadcast by

the Access Point (AP).

Note that the default values for the advanced wireless settings are shown in a table on the

right-hand side of the screen:

2. Type a value for RTS Threshold. This value represents the minimum size of data frames above

which Request-To-Send (RTS) protocol is used. RTS helps prevent data collision from hidden

nodes.

3. Type a value for Fragmentation Threshold. For efficiency in high-traffic situations, large files

are split into fragments. This parameter specifies the default packet size

4. Type a value for DTIM Interval. This parameter specifies the number of beacon intervals

between successive Delivery Traffic Indication Maps (DTIMs).

5. Choose a Preamble Type, either Short (72 bits) or Long (144 bits).

6. Click Apply to put your changes in effect, or click Cancel to undo your changes.

Table of Contents