Viewing Stored Images; Export Saved Images - Dali LT3 User Manual

LT3/LT7 Thermal Image Camera User Manual

3.3.4Viewing stored Images

Press Menu key to activate the main menu. Choose File->Open to open the image.
●
When image is opened, choose Left or Right keys to select the previous or next
●
images respectively.
If the instrument is in IR mode, it will display all IR images of each saved image, it
●
will display "No Image" if there is no IR image for that saved image.
If the instrument is in CCD mode, it will display all CCD images of each saved
●
image, it will display "No Image" if there is no CCD image for that saved image.
If the trigger is configured to IR/CCD mode by Setup->Sys. Setup->Trigger, when
●
in image view, the trigger can switch between IR and CCD images for each saved image.
it will display "No Image" if there is no IR or CCD image for that saved image.
Press C key to exit the Image view mode and return to the real-time measurement
●
mode.

3.3.5 Export saved images

Use of USB port to download images in TF card. With a standard USB cable,
●
connect device port to PC and export saved images.
Remove the TF card and insert into TF card reader, connect to USB port on PC
●
and export saved images.
17
DALI