Dali LT3 User Manual page 11

LT3/LT7 Thermal Image Camera User Manual
Laser – Pulling trigger activates laser sight and releasing deactivates it.
Spot– Pulling and releasing trigger adds a spot. Pulling and releasing trigger again
removes the spot.
Area –Pulling and releasing trigger adds an area. Pulling and releasing trigger again
removes the area.
Save – the same with "S" key, pressing to initiate a Save cycle.
IR/CCD - Pulling and releasing trigger toggles between the IR image and the CCD
image.
[7] Microphone
Used for recording a voice message with the Saved image. See Section 4.5.3 for
details.
10
DALI