Dali LT3 User Manual page 10

LT3/LT7 Thermal Image Camera User Manual
memory, will return to real-time measurement status.
When not in menu mode or parameter editing, pressing and releasing the C key
●
will toggle between the thermal image and the visible CCD camera image.
When a parameter is selected, such as a measurement cursor, pressing the C key
●
will delete the highlighted measurement.
[4] Freeze/Save key (Marked "S")
Used for freezing or saving thermal image. Press the key once to freeze the image.
Press Confirm to save the image or Press C to return to real-time measurement. If Voice
recording is enabled, Voice comment dialog box will display.
[5] Menu/Confirm key (bar)
Includes Up, Down, Left, Right and Menu/Confirm (center) keys. Function varies
with operation mode.
In Menu mode, it is used for menu selection. Up and Down keys are for same level
of menu operation. Left and Right keys are for different levels menu operation. Confirm
key (center) is to activate the menu and confirm the choice.
In Image mode, press Up or Down key to activate X2 digital zoom. The screen will
display "X2" in the upper left corner. Press Up or Down key to return to the original
image.
In Spot Measurement editing mode (activated immediately after adding a spot or
by selecting via the A key), press the Menu key to pop up the attribute box. Press four
navigation keys to move the spot location.
In line temperature measurement editing mode (activated immediately after adding
a line or by selecting via the A key), press the Menu key to pop up the attribute box.
If measurement line is horizontal, press Up and Down keys to move the line location;
press Left and Right keys to move the reference line. If measurement line is vertical, press
Left and Right keys to move the line; press Up and Down keys to move the reference
line.
In area measurement editing mode (activated immediately after adding an area or
by selecting via the A key), press the Confirm key to pop up the attribute box. Select
in the attribute box the parameter to be edited, either size or position. Press the four
navigation keys to move the area location or change the size of the area.
[6] Trigger/Shortcut key
The trigger key serves as a shortcut to access the following functions:
9
DALI