LT3/LT7 Thermal Image Camera User Manual
Language: Select system language from 9: English, Spanish, French, German,
●
Italian, Portuguese, Korean, Japanese, Russian.
Auto Calibration: Select Auto Calibration and press right arrow key, Auto Calib
●
mode dialogue box will pop up. User can select from 3 modes: long, short or customize.
Customize can guide user to set the time interval for auto calibration. Range is 0, which
is Off and 30 to 600 in 1 second increments. Auto calibration is used to improve image
quality and measurement accuracy during use.
LCD Brightness: User can select the brightness of LCD display with choices being
●
20, 40, 60 80 and 100%.
Trigger: User can define the trigger key function from Laser, Spot Temp, Area
●
Temp, Save key and IR/CCD.
Laser: Allows user to Turn on and turn off the laser sight.
●
Spot Temp: Adds or deletes Spot Measurement.
●
Area Temp: Adds or deletes Area Measurement.
●
Save key: Initiates the save routine.
●
IR/CCD:Switches between IR image and CCD image.
●
Video Mode: Allows selection of PAL or NTSC video output.
●
Standby Time:Allows user to select None, 2, 5, 10 or 15 minutes. If no
●
button depressions are made during the set time, the camera will turn off the screen
automatically, to prolong battery life. Press any key except power key to reactivate the
screen. If set to None, the function is disabled.
AutoOffTime: Allows user to select None, 2, 5, 10 or 15 minutes. If no button
●
depressions are made during the set time, the camera will turn off the main power
automatically to prolong battery life. If set to None, the function is disabled. When
StandbyTime is enabled, AutoOffTime will start calculating from StandbyTime.
26
DALI