Images Storage; Image Playback - Dali T9 User Manual

Temperature measurement area attribute setting menu
Click to select the temperature measurement area, and press and hold the middle
point of the area to drag the temperature measurement area as a whole; press and hold
any of the four corners of the area to drag the corner of the temperature measurement area
to change the size of the area. The temperature measurement area attribute setting menu
has three items: ratio coefficient, distance setting, and analysis setting. Under the analysis
setting, there are submenus of maximum temperature, minimum temperature, average
temperature, and maximum temperature difference.
If you want to set the temperature measurement object as the "reference object",
please refer to "4.8.2 Temperature measurement function setting".
! Note: The thermal imager can only set one reference temperature measurement
target.

3.4.3 Images Storage

To store the acquired current image, you can choose one of the following two
methods:

Press the middle button or click the three dots at the bottom of the touch screen to
pop up the main menu, select the "photograph" icon in the menu, and the system
will automatically save the image.

Press the store button. After the image is frozen, press this button again to save
the image.

3.4.4 Image playback

Press the middle button or click the three dots at the bottom of the touch screen
to pop up the main menu, select the "playback" icon to pop up the picture library, select
the folder to be played back, and perform image playback.
17