LT3/LT7 Thermal Image Camera User Manual
4.1.4 Prompt box interface
[1] Prompt box name:Display the prompt box name, e.g. Del file.
[2] Content:Display the content in the prompt box, e.g. Del Image File?
4.2 Measurement
Used for adding or deleting a measurement. Press Menu key to activate the main
menu. Select Measurement and press Confirm key. It will display the Measurement
dialog box. Use the Left and Right arrows to scroll through the available measurement
options. Highlight the option you wish to use and press Confirm key. Options are:
None – Deletes all measurements from the screen.
●
Add Hot Spot – adds a moving cursor that automatically displays the hottest spot
●
in the image. Designated by SH and +H.
Add Cold Spot – adds a moving cursor that automatically displays the coldest
●
spot in the image. Designated by SL and +L.
Add Spot – adds up to 2 fixed cursors, user adjustable by the cursor editing
●
mode. Designated by S1, +1 and S2, +2.
Horizontal – Adds horizontal line measurement to display profile of temperatures
●
along the line. Designated by LH. Either Horizontal or Vertical can be enabled at one
time, but not both.
Vertical – Adds vertical line measurement to display profile of temperature along
●
the vertical line. Designated by LV. Either Horizontal or Vertical can be enabled at one
time, but not both.
Area – adds up to 3 area boxes, with min, max or average detection within each
●
box. Areas can be sized and moved by the user. Designated by []1, []2 and []3.
NOTE: To delete a single object, press A key to select the object and then press C
key to delete.
20
DALI