Auto/Manually - Dali LT3 User Manual

LT3/LT7 Thermal Image Camera User Manual

4.3 Auto/Manually

By adjusting the temperature and color corresponding relation, users can observe
enhanced image quality and easily find and analyze thermal fault. There are two
operational modes Auto/Manually available.
Press Menu key to activate the main menu and select Auto/Manually. The low-level
menu will display the inactive mode followed by a "?". Pressing the > key followed
by the Confirm key will switch to the displayed mode. Press A key to select palette or
adjust it manually.
In Auto mode, the camera automatically determines the low and high temperature
levels to assign to the lower and upper ends of the palette. In Manually mode, the
Operator may assign the lower and upper end values to enhance the image quality by
adjusting the temperature to color relationship.
In Manually mode pressing the left or right arrow will reduce or increase the Span
and pressing the up or down arrow will reduce or increase the Level.
21
DALI