Microtek ArtixScanDI 7200S User Manual page 56

5. Follow the instructions described in the step 3 and 4 to change a new roller
6. After done, push the roller cover up until you hear a "click".
NOTE:
•
•
56 ArtixScan DI 7200S/7280S User's Manual
for the roller at the bottom.
a) Remove the old roller from the bottom
b) Insert a new roller at the bottom
The recommended replacement point for your Feed Roller Assembly is after
scanning approximately 100,000 scans through the feeder.
Please contact your local resellers for purchasing new Feed Roller Assembly.
In order to avoid breaking down
the levers at the corners of the
roller cover, remember to push
them downward slightly when
push the roller cover back.