Table of Contents
Advertisement
3. To change the roller at the top:
a)
Rotate the lever on the roller shaft
down to loosen the roller.
b)
Move the roller shaft to the left
horizontally.
c)
Hold the both sides of the roller
to pull it out carefully from its
compartment.
4. Insert the new roller into its compartment:
a)
Mount the roller with a white cap
at the right of the roller into the
mounting socket at the right side of
the compartment.
b)
Then, move the roller shaft to the
right horizontally. Insert it into a
hollow at the left side of the roller
until it sticks into place.
c)
Rotate the lever on the roller shaft
up to fasten the roller, and push
the whole assembly back into its
compartment.
Lever
ArtixScan DI 7200S/7280S User's Manual
Roller shaft
55
Advertisement
Table of Contents
