Additional Features; Iro Ni Ng Ti Ps A N D Tr Ic Ks - Black & Decker Elite Digital Pro Series Use And Care Manual

6. To iron with steam, push the Steam/Auto clean slider (C) to the desired
amount of steam: High Steam
the steam settings should be used with the following fabric heat
settings
7. When finished ironing, scroll to the OFF setting. Turn the Steam/
Auto clean slider to the Dry Iron
8. Stand iron on its heel rest and allow it to cool off.

ADDITIONAL FEATURES

Burst of Steam
Use for ironing in the vertical and horizontal position.
Press this button to generate a burst of steam.
For best performance, leave several seconds
between bursts. (D)
Spray Mist
Press the Spray Mist button to generate a spray of
water. (E) Spray Mist is used to dampen tough wrinkles
while dry or steam ironing. Do not spray silk.
3-Way Auto Shut Off
The iron will automatically shut off after 30 seconds of inactivity if left on
its soleplate or side. If left vertically on the heel rest, it will shut off after
8 minutes. When the iron is in Auto Shutoff mode, "OFF" will blink on the
Fabric/Temp. display. Simply move the iron to cancel shut down.

IRO NI NG TI PS A N D TR IC KS

• The iron can be filled with ordinary tap water; if your water is hard, you
may want to use 50 percent distilled water and 50 percent tap water.
• If you're unsure of the fabric's content, test a small area (on the inside
seam or hem) before you proceed to iron the entire garment or cloth.
• Whenever ironing a garment with mixed fabrics, select the fabric
setting for the most delicate fabric. For example, when ironing a shirt
that is 65% cotton and 35% polyester, use the "blend" setting.
• Whenever temperature settings are changed to a higher or lower
temperature, allow the iron to stand a minute or so to allow heat up or
cool down. Test garment by pressing a small hidden area to make sure
temperature of iron is correct.
6
D3320_IB_28567_revB.indd 6 D3320_IB_28567_revB.indd 6
: blend, wool, cotton, and linen.
or Low steam . For optimal results,
position and unplug the iron.
D
E
3/26/21 11:26 AM 3/26/21 11:26 AM