Cleaning And Care - Black & Decker Elite Digital Pro Series Use And Care Manual

Hide thumbs Also See for Elite Digital Pro Series:
Table of Contents

Advertisement

Available languages

Available languages

CLEANING AND CARE

This product contains no user serviceable parts. Refer to service qualified
service personnel.
CLEANING OUTSIDE SURFACES
1.
Make sure the iron is unplugged and has completely cooled.
2.
Wipe the soleplate and outer surface with soft, damp cloth. Water
and small amounts of gentle household soaps, such as dishwashing
liquid, can be used. Never use heavy-duty cleaners, vinegar or
abrasive scouring pads that may scratch or discolor the iron.
3.
After the iron has been thoroughly dried, turn the iron back on and lightly
steam over an old cloth. This will help remove any reside left in the vents.
4.
When finished cleaning, turn iron off and allow time to cool before storing.
AUTO CLEAN™ SYSTEM
For optimal results over time, it is recommended that you clean your iron
about once a month to keep the steam vents free of build-up.
1.
Fill the water tank to the MAX fill line. Plug in the iron.
2.
Select the cotton/linen setting on the Temp display and stand the iron
on its heel while it preheats.
3.
Once the iron has reached the desired temperature; turn it off and
then unplug it from the outlet.
4.
Hold iron over a sink with the soleplate facing down.
5.
Move the Steam/Auto clean slider all the way to
the right to the Auto Clean™ setting
in that position. (F) Be careful, as hot water and
steam will come out of the vents.
6.
Continue to hold the lever in that position until all
of the water has emptied. If necessary, move the
iron side-to-side and front-to-back to aid the process.
7.
When finished, release the lever from the Auto Clean™ position and
place the iron on its heel rest.
8.
Plug the iron back in and allow it to heat for about 2 minutes to dry
out any remaining water.
STORING YOUR IRON
1.
Once the iron is turned off and unplugged from the outlet, allow it
to cool.
2.
Check that the steam lever is set to "DRY".
3.
Wrap the cord loosely around the iron.
4.
Store vertically on its heel to prevent water leaking from the soleplate.
D3320_IB_28567_revB.indd 7
D3320_IB_28567_revB.indd 7
and hold it
F
7
3/26/21 11:26 AM
3/26/21 11:26 AM

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

This manual is also suitable for:

Elite digital pro d3320Elite digital d3320

Table of Contents