Advertisement
UsInG tHe clock/pRoGRaMMeR-elec
clock
End time
After power on, '0:00'and the clock icon
will flash on the screen, press any button
to quit.
Button 1:*clock→alarm setting→duration
setting→end time setting→clock
setting→*clock（*：default）
Button 2: minus(-)
Button 3: plus
Button 4: lock
1、Set alarm
1) press button 1, alarm icon flashing
means alarm function chosen. "0:00"will
display. press button 2 and 3 to set
alarm
time.
Time
"0:01~23:59". press once to plus or
minus 1, and hold for 3 seconds for
quick-adjust. Waiting for 5 seconds to
confirm setting, the alarm icon will be
display, alarm time will be shown and
alarm starts. After the count down,
"0:00"will display, buzzing starts 4 times
every 5 seconds. press any button to
stop.
Alarm
d uration
Function
Minus
adjust
range
is
lock
plus
lock
2) If there's no operation for 2 minutes,
buzzing will stop.
2、duration setting
1) press button 1, choose 'duration'
function, duration icon will flash, "0:00"
will display. press button 2 and 3 to set
duration
time,
"0:01~23:59". press once to plus or
minus 1, hold for 3 seconds for quick-
adjust. The flashing will last for 5
seconds, so the settings must be done
within this time frame or the time of day
will show again. After setting, the
duration icon will display, counting down
starts. When counting down stops,
power will turn off, 'duration' icon will
flash, "0:00" will display, buzzing will
starts for twice every 5 seconds. press
any button to stop buzzing, and press
button 1 to show the time of day.
2) during the cooking duration, press
button 1 can check and change the
cooking time.
19
adjusting
range
is
Advertisement
